Thanks, hope you're well too!mcc wrote: ↑Mon Mar 30, 2020 1:32 pmHi,
...by the way...if someone still don't dare to flash it: Since then it does not have had any negative impact on my DM42
Hope you are all well and will stay healthy - your calculators will need you!
(not makeing jokes about corona and the world crisis...but smiling has become so silent these days... )
Cheers!
Meino
UPDATE: DMCP-3.17 / DM42-3.15rc1
Re: UPDATE: DMCP-3.17 / DM42-3.15rc1
Greetings,
Massimo
ajcaton
-+×÷ left is right and right is wrong Casted in gold
Massimo
ajcaton
-+×÷ left is right and right is wrong Casted in gold
Re: UPDATE: DMCP-3.17 / DM42-3.15rc1
Hi,
and here comes the release version...
Have a nice time a stay healthy!
Cheers!
Meino
and here comes the release version...
Have a nice time a stay healthy!
Cheers!
Meino
- Attachments
-
- dm42.png (47.95 KiB) Viewed 6854 times
DM 42 - SN: 00373, Firmware release v.:3.22. / DMCP 3.24. as compiled by SwissMicros
Re: UPDATE: DMCP-3.17 / DM42-3.15rc1
Hi Meino,
many thanks, for looking at https://www.swissmicros.com/dm42/firmware/
and for reporting here.
all the best for all of you!
Thomas
[ HP48/49/50/42S/WP34/HP Prime/ DM42 (#00185+00318) ]
Re: UPDATE: DMCP-3.17 / DM42-3.15rc1
Great update! Now I can load my DM42 state onto my iPhone. Saves a lot of hassle. Also I really like the ability to change word size for base conversions. I don’t often do base conversions, but when I do it’s either 8 or 16 bits. Thanks SM and Thomas!
- Dan Simpson
- Posts: 105
- Joined: Wed Mar 18, 2020 3:29 pm
- Location: Arizona
Re: UPDATE: DMCP-3.17 / DM42-3.15rc1
My DM42 is lost somewhere on a trip back to Switzerland for repairs...
My Collection: HP-55, HP-67 (Teenix Mod), HP-15C, HP-16C, HP-41CV, HP-41CX, SY41-CL, DM41X, DM42, HP-42S, HP-48G, HP-71B, HP-75C, HP-86B.
Re: UPDATE: DMCP-3.17 / DM42-3.15rc1
Which reminds me: I mislabelled a state file (clumsiness) and want to rename it or delete it and start over but I haven't yet found any options for either. Possible?
--
HP: 55/67/41C/HP-IL/ProtoCODER*/41CL/MLDL**/41CX/16C/71B/42S/33s***/35s ...
DM: 42 ...
Etc: If a calculator has equals, why buy one unless it's the cheapest?
* ProtoTECH, USA / ** Eramco, Netherlands / *** Carly Failurina model
HP: 55/67/41C/HP-IL/ProtoCODER*/41CL/MLDL**/41CX/16C/71B/42S/33s***/35s ...
DM: 42 ...
Etc: If a calculator has equals, why buy one unless it's the cheapest?
* ProtoTECH, USA / ** Eramco, Netherlands / *** Carly Failurina model
Re: UPDATE: DMCP-3.17 / DM42-3.15rc1
Assuming this is on a DM42....
1. Connect the USB FAT drive
2. On your PC or MAC, use File Explorer or Finder to go to the STATE folder
3. Copy the current state file to your PC/Mac
4. Rename the file to whatever you want it to be
5. Copy this file to the STATE folder
6. Exit the USB disk mode
7. Use the menu to go to the "Calc State> [oldname]" option
8. Pick Load State
9. Select the file with the new name and open it
10. Enjoy your new state file w/proper name
You can use USB Drive mode again to go back to the same folder and delete the old file with the incorrect name, but it takes so little space, I'd ignore it until the next time you connect to your PC.
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
Re: UPDATE: DMCP-3.17 / DM42-3.15rc1
Thanks. Yes it is re a DM42, as I assumed that the DM42 is what Thomas was talking about. I was hoping to avoid the use of another device, but OK: have cable, can travel.
--
HP: 55/67/41C/HP-IL/ProtoCODER*/41CL/MLDL**/41CX/16C/71B/42S/33s***/35s ...
DM: 42 ...
Etc: If a calculator has equals, why buy one unless it's the cheapest?
* ProtoTECH, USA / ** Eramco, Netherlands / *** Carly Failurina model
HP: 55/67/41C/HP-IL/ProtoCODER*/41CL/MLDL**/41CX/16C/71B/42S/33s***/35s ...
DM: 42 ...
Etc: If a calculator has equals, why buy one unless it's the cheapest?
* ProtoTECH, USA / ** Eramco, Netherlands / *** Carly Failurina model
Re: UPDATE: DMCP-3.17 / DM42-3.15rc1
If you want to do it on your DM42, here is what you can do:
- Save the current state in a new state file
- Load the state file you want to rename
- Save the new current state under the new name
- Load the state file you saved in step 1 to retrieve the initial state
- For removing the unwanted state files (created in step 1, loaded in step2), you’ll still need to connect to a computer
DM42: 00425 - DM41X: β00066 - WP43: 00042
Re: UPDATE: DMCP-3.17 / DM42-3.15rc1
Thanks. I had already created a second state file with the new name, as you have suggested. What I was hoping for was a way to remove the wrongly named state file (or rename it immediately to achieve the same effect in the 42 itself) so I didn't save updates to the misnamed one instead of the correctly named one and have a doubly wrong set to sort out.
When it comes to keys and buttons I have a uncanny ability to hit the wrong ones and then noticing until too late. What am I doing here getting wet on the roof when I left my bike and poncho in the basement? Last X is my best friend.
When it comes to keys and buttons I have a uncanny ability to hit the wrong ones and then noticing until too late. What am I doing here getting wet on the roof when I left my bike and poncho in the basement? Last X is my best friend.
--
HP: 55/67/41C/HP-IL/ProtoCODER*/41CL/MLDL**/41CX/16C/71B/42S/33s***/35s ...
DM: 42 ...
Etc: If a calculator has equals, why buy one unless it's the cheapest?
* ProtoTECH, USA / ** Eramco, Netherlands / *** Carly Failurina model
HP: 55/67/41C/HP-IL/ProtoCODER*/41CL/MLDL**/41CX/16C/71B/42S/33s***/35s ...
DM: 42 ...
Etc: If a calculator has equals, why buy one unless it's the cheapest?
* ProtoTECH, USA / ** Eramco, Netherlands / *** Carly Failurina model