It's hard to upload human brains.
WP43 News
Re: 43S News
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
Re: 43S News
We're still waiting for the 34S manual.......
Human brains have had over half a decade to adjust to it.
Human brains have had over half a decade to adjust to it.
Re: 43S News
AFAIK & IIRC, I offered the 34S manual for a honest return to a forum you know. Though the conditions set by said forum were definitly unbalanced, so there will be no return for the time being, and in consequence there will be ...
It's all a give and take. Sorry.
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
Re: 43S News
Our SW department made a big step forward. The current SW is featuring now:
- Real results with 34 digits (no more 16-digit reals).
- Complex results with 34 digits for each part.
- All the recent keyboard changes implemented (incl. a primary x^2 - a primary SQRT(x) went into EXP).
- Extended precision in RBR.
The new named system flags are not implemented yet and thus, STATUS is still the old one. We ask you for a little patience in this matter.
Enjoy testing!
EDIT: Added point 4.
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
Re: 43S News
Now SHOW is up and working. Some cosmetics may be requested but the functionality is there.
You find the new WP43S.exe program in the repository of our project: https://gitlab.com/Over_score/wp43s/tre ... 20binaries
The new named system flags are not implemented yet and thus, STATUS is still the old one. We ask you for a little patience in this matter.
Enjoy testing! And if you find any bugs, please report!
You find the new WP43S.exe program in the repository of our project: https://gitlab.com/Over_score/wp43s/tre ... 20binaries
The new named system flags are not implemented yet and thus, STATUS is still the old one. We ask you for a little patience in this matter.
Enjoy testing! And if you find any bugs, please report!
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
Re: 43S News
How do we enter a longint once you are in shorting last base mode?
The OM p132 is not clear on this.
RESET 7#8 ENTER, produces 7 base 8 in X and Y.
4 ENTER, produces 4 base 8 in X and Y.
I cannot find a way out, except to type 1. [<-] [<-]
Is this the only way?
The OM p132 is not clear on this.
RESET 7#8 ENTER, produces 7 base 8 in X and Y.
4 ENTER, produces 4 base 8 in X and Y.
I cannot find a way out, except to type 1. [<-] [<-]
Is this the only way?
Jaco Mostert
Elec Eng, South Africa
https://47calc.com C47 (s/n 03818 & 06199), WP43 (0015). In box: HP42S, HP32Sii, WP34S&C, HP28C, HP35s, EL-506P, EL-W506, PB700; ex: FX702P, 11C, HP67 & HP85; iOS: 42s Byron, Free42+, WP31S/34S, HCalc.
Elec Eng, South Africa
https://47calc.com C47 (s/n 03818 & 06199), WP43 (0015). In box: HP42S, HP32Sii, WP34S&C, HP28C, HP35s, EL-506P, EL-W506, PB700; ex: FX702P, 11C, HP67 & HP85; iOS: 42s Byron, Free42+, WP31S/34S, HCalc.
Re: 43S News
Not really a bug, but just a suggestion,
when entering a HEX number, the GAP setting shows the decimal gap of 3 whereas while entering HEX, I would expect it to change to 2. It does change to 2 once entered - see below.
when entering a HEX number, the GAP setting shows the decimal gap of 3 whereas while entering HEX, I would expect it to change to 2. It does change to 2 once entered - see below.
Jaco Mostert
Elec Eng, South Africa
https://47calc.com C47 (s/n 03818 & 06199), WP43 (0015). In box: HP42S, HP32Sii, WP34S&C, HP28C, HP35s, EL-506P, EL-W506, PB700; ex: FX702P, 11C, HP67 & HP85; iOS: 42s Byron, Free42+, WP31S/34S, HCalc.
Elec Eng, South Africa
https://47calc.com C47 (s/n 03818 & 06199), WP43 (0015). In box: HP42S, HP32Sii, WP34S&C, HP28C, HP35s, EL-506P, EL-W506, PB700; ex: FX702P, 11C, HP67 & HP85; iOS: 42s Byron, Free42+, WP31S/34S, HCalc.
Re: 43S News
No, it isn't. Please see footnote 116 on p. 132 of the OM.Jaymos wrote: ↑Wed Jan 08, 2020 8:26 pmHow do we enter a longint once you are in shorting last base mode?
The OM p132 is not clear on this.
RESET 7#8 ENTER, produces 7 base 8 in X and Y.
4 ENTER, produces 4 base 8 in X and Y.
I cannot find a way out, except to type 1. [<-] [<-]
Is this the only way?
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
Re: 43S News
How shall the poor calculator know in advance that you really want to enter a HEX number? You may enter # at the end and specify a different base... Interpretation starts with input closed.
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
Re: 43S News
Disagree. It knows your are in #16, i.e. last base on screen. It needs no interpretation. It knows.
Jaco Mostert
Elec Eng, South Africa
https://47calc.com C47 (s/n 03818 & 06199), WP43 (0015). In box: HP42S, HP32Sii, WP34S&C, HP28C, HP35s, EL-506P, EL-W506, PB700; ex: FX702P, 11C, HP67 & HP85; iOS: 42s Byron, Free42+, WP31S/34S, HCalc.
Elec Eng, South Africa
https://47calc.com C47 (s/n 03818 & 06199), WP43 (0015). In box: HP42S, HP32Sii, WP34S&C, HP28C, HP35s, EL-506P, EL-W506, PB700; ex: FX702P, 11C, HP67 & HP85; iOS: 42s Byron, Free42+, WP31S/34S, HCalc.