Leather Case for DM42
Leather Case for DM42
I have recently found a very nice leather case for the DM42. A robust & well made leather holder with belt loop. It is an Australian Buckaroo Leatherworks MPPX case. It's a snug fit, and I could not be more pleased. The bottom of the case has two small leather pieces folded into the bottom of the holder to provide a little more cushioning for the item (iPhone, etc) inserted into the case. I snipped these off to allow the DM42 to be a little more deeply seated. The Leatherworks MPPX case could have been purpose built for the DM42. It's reminiscent of the old hard leather HP-41 case. I recommend it highly, and it looks fantastic. The workmanship is of the highest quality. I will buy one or two more for my DM42 collection. Buckaroo leather cases are distributed by a number of suppliers and should be widely available. If you have difficulties shipping outside of Australia, I suggest that you contact them directly. It's a marriage made in heaven! Regards, Kim.
- Attachments
-
- mppx-buc-xl-smartphone-pouch-ppx-buc.878.jpg (25.88 KiB) Viewed 9451 times
-
- Posts: 795
- Joined: Wed May 03, 2017 7:46 pm
- Location: Malone, NY USA
Re: Leather Case for DM42
Hey, now I can wear my calculator on my belt again. Just like back in the '70s when I was a nerd!
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Re: Leather Case for DM42
WAS a Nerd?!toml_12953 wrote: ↑Fri May 31, 2019 4:37 pmHey, now I can wear my calculator on my belt again. Just like back in the '70s when I was a nerd!
You say that like it is a bad thing.
Just the fact that we are here on an RPN Calculator Forum makes us all still nerds by definition!
-
- Posts: 795
- Joined: Wed May 03, 2017 7:46 pm
- Location: Malone, NY USA
Re: Leather Case for DM42
You have me there! Nolo contendere.TwoWeims wrote: ↑Fri May 31, 2019 8:31 pmWAS a Nerd?!toml_12953 wrote: ↑Fri May 31, 2019 4:37 pmHey, now I can wear my calculator on my belt again. Just like back in the '70s when I was a nerd!
You say that like it is a bad thing.
Just the fact that we are here on an RPN Calculator Forum makes us all still nerds by definition!
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Re: Leather Case for DM42
Just trying to be helpful...
Re: Leather Case for DM42
I apologize if my comment came across as disrespectful. It was not meant to be. It was meant to be an affectionate jab at my fellow "Nerds".
I wore a calculator on my belt in the 70's and 80's as well.
I like the looks of that Buckaroo case but I don't see a source in the US. I have been using the following case for my iPhone for the past couple of years:
https://www.amazon.com/Tradesman-Holder ... B00G8RNLWI
It has held up very well and It fits the DM42 like it was made for it.
Or if you want to delve even deeper into nerd territory and have a 3D printer, here is a link to a hard case that I designed for the DM42:
https://www.thingiverse.com/thing:3529736
I wore a calculator on my belt in the 70's and 80's as well.
I like the looks of that Buckaroo case but I don't see a source in the US. I have been using the following case for my iPhone for the past couple of years:
https://www.amazon.com/Tradesman-Holder ... B00G8RNLWI
It has held up very well and It fits the DM42 like it was made for it.
Or if you want to delve even deeper into nerd territory and have a 3D printer, here is a link to a hard case that I designed for the DM42:
https://www.thingiverse.com/thing:3529736
-
- Posts: 795
- Joined: Wed May 03, 2017 7:46 pm
- Location: Malone, NY USA
Re: Leather Case for DM42
We were all taking it in good fun. I know I was!
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
-
- Posts: 34
- Joined: Sat Jul 22, 2017 9:14 pm
Re: Leather Case for DM42
I like the looks of the case you created. I was able to adapt the ASTECH Hard Case to the DM42. See my post in the following threadTwoWeims wrote: ↑Mon Jun 03, 2019 3:33 pm
Or if you want to delve even deeper into nerd territory and have a 3D printer, here is a link to a hard case that I designed for the DM42:
https://www.thingiverse.com/thing:3529736
for some photos:
viewtopic.php?f=15&t=1961&p=8764#p8764
It works great. But of course ASTECH cases are difficult to find. I was fortunate to acquire of couple a number of years ago.
Bill
Smithville, NJ
-
- Posts: 137
- Joined: Wed Jun 14, 2017 9:27 pm
Re: Leather Case for DM42
I used to be a nerd. I still am, but I used to be too.TwoWeims wrote: ↑Fri May 31, 2019 8:31 pmWAS a Nerd?!toml_12953 wrote: ↑Fri May 31, 2019 4:37 pmHey, now I can wear my calculator on my belt again. Just like back in the '70s when I was a nerd!
You say that like it is a bad thing.
Just the fact that we are here on an RPN Calculator Forum makes us all still nerds by definition!
(Paraphrasing the late, great Mitch Hedberg.)
Re: Leather Case for DM42
Good grief. Did you ever hear anything about international trade? How would this world look if everyone would buy in his home village only? Relentless ... ummh ... Amazon is for the fearful village people ...TwoWeims wrote: ↑Mon Jun 03, 2019 3:33 pmI like the looks of that Buckaroo case but I don't see a source in the US. I have been using the following case for my iPhone for the past couple of years:
https://www.amazon.com/Tradesman-Holder ... B00G8RNLWI
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041