Case for Voyager 'L' size

Discussion of hardware issues related to the DM1x/DM41. Please ensure that you specifiy whether the issue is related to a credit card size unit or a "Voyager" unit (DM1xL/DM41L).
budmur
Posts: 46
Joined: Tue Apr 25, 2017 2:06 pm
Location: Eastern Tennessee, USA

Re: Case for Voyager 'L' size

Post by budmur »

DA74254 wrote:
Thu Mar 28, 2019 9:27 pm
budmur wrote:
Thu Mar 28, 2019 2:14 am
... a copy of Avogardro's Numbers (a small reference book), ...
Is that something that's obtainable for the mere mortals on this forum? :)
20190329_094838.jpg
20190329_094838.jpg (135.68 KiB) Viewed 6987 times
It looks like it's out of print. It was compiled by Herbst and Schiller, copyright 1988. Mine is an artifact from my University days. It's about 100 pages, with conversion tables, properties of materials, steam tables, pipe information, etc. It's kind of like a very cut down version of Glover's Pocket Ref.
DM42 S/N 00039
DA74254
Posts: 193
Joined: Tue Oct 03, 2017 11:20 pm
Location: Norway/Latvia

Re: Case for Voyager 'L' size

Post by DA74254 »

Unobtainable, that is..
Please excuse me while I'm in my corner, sobbering.. :(
Esben
DM42 SN: 00245, WP43 Pilot SN:00002, DM32 SN: 00045 (Listed in obtained order).
rprosperi
Posts: 1703
Joined: Mon Apr 24, 2017 7:48 pm
Location: New York

Re: Case for Voyager 'L' size

Post by rprosperi »

Walter wrote:
Wed Mar 27, 2019 7:31 pm
I'd recommend looking for an HP-17bii+silver.....
Here's an example of a 17bii+ w/case listing on eBay, that has pics of the case:

https://www.ebay.com/itm/HP-17bll-Finan ... 601332479

$33 w/shipping (though in this case, only to USA).
--bob p

DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
User avatar
Walter
Posts: 3070
Joined: Tue May 02, 2017 11:13 am
Location: On a mission close to DRS, Germany

Re: Case for Voyager 'L' size

Post by Walter »

rprosperi wrote:
Sat Mar 30, 2019 2:30 pm
Here's an example of a 17bii+ w/case listing on eBay, that has pics of the case:

https://www.ebay.com/itm/HP-17bll-Finan ... 601332479

$33 w/shipping (though in this case, only to USA).
Not unusual, pretty much a closed market: America first!

But the same case was apparently sold with the predecessor, too, see e.g. here: https://www.ebay.de/itm/Hewlett-Packard ... 3410388436 . Just for your information.
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
cdmackay
Posts: 281
Joined: Fri Oct 05, 2018 8:33 pm
Location: Cambridge, UK
Contact:

Re: Case for Voyager 'L' size

Post by cdmackay »

thanks very much both. I have to say I much prefer the leather versions. Have seen too many tatty flaking vinyl ones.

I bought a 17b with folding case on eBay, so that will do for my 42s.

The Voyagers will do in the tobacco pouches until I find something better.
Cambridge, UK
41CL/DM41X 12/15C/16C DM15/16 17B/II/II+ 28S 42S/DM42 32SII 48GX 50g 35s WP34S PrimeG2 WP43S/pilot
Casio, Rockwell 18R
rprosperi
Posts: 1703
Joined: Mon Apr 24, 2017 7:48 pm
Location: New York

Re: Case for Voyager 'L' size

Post by rprosperi »

Walter wrote:
Sat Mar 30, 2019 5:05 pm
But the same case was apparently sold with the predecessor, too, see e.g. here: https://www.ebay.de/itm/Hewlett-Packard ... 3410388436 . Just for your information.
I don't think that is an original case for the 17bii+gold model. The original 10bii and the 17bii+gold came with a case similar to the later 17bii+silver, but the bottom of the case is somewhat rounded, following the contour of those machines, while the 17bii+silver case is straight/flat, again following the design of the bottom of that machine.

See the photo here for an example: http://www.samsoncables.com/catalog/pro ... 7BIIPCCase, though in this case it is a 3rd-party case, and they actually show a 17bii+silver being put in. It will barely fit, but the point is the early model HP cases were wounded and the later ones straight.

Back to the original point, I think the DMxxL machines would also fit in this case from Samson too, though maybe a bit tight (top-to-bottom).
--bob p

DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
cdmackay
Posts: 281
Joined: Fri Oct 05, 2018 8:33 pm
Location: Cambridge, UK
Contact:

Re: Case for Voyager 'L' size

Post by cdmackay »

thanks Bob; shame those Samson cases aren't easily available here. Buying from US without an included customs service can result in excess charges being applied at this end (e.g. "handling charge").
Cambridge, UK
41CL/DM41X 12/15C/16C DM15/16 17B/II/II+ 28S 42S/DM42 32SII 48GX 50g 35s WP34S PrimeG2 WP43S/pilot
Casio, Rockwell 18R
boessu
Posts: 22
Joined: Mon Jan 28, 2019 10:40 pm

Re: Case for Voyager 'L' size

Post by boessu »

Maybe this site will help.
https://www.calculator.ch/tags/Protective-cases

E.g. this one displays a HP Voyager Model in the case: https://www.calculator.ch/item/CCXHSTSW

However, I'm not sure they would send you the cases outside Switzerland. At least you could use this site for searching a case in the right size. It seems as most calculators are bigger than the SwissMicros "L" models. ;-)
cdmackay
Posts: 281
Joined: Fri Oct 05, 2018 8:33 pm
Location: Cambridge, UK
Contact:

Re: Case for Voyager 'L' size

Post by cdmackay »

thanks; looks like they don't ship outside their country.
Cambridge, UK
41CL/DM41X 12/15C/16C DM15/16 17B/II/II+ 28S 42S/DM42 32SII 48GX 50g 35s WP34S PrimeG2 WP43S/pilot
Casio, Rockwell 18R
rprosperi
Posts: 1703
Joined: Mon Apr 24, 2017 7:48 pm
Location: New York

Re: Case for Voyager 'L' size

Post by rprosperi »

There are pretty good photos of the 17bii+ Silver case in this eBay auction:

https://www.ebay.com/itm/Hewlet-Packard ... 4269816345

It's pretty cheap too, only $25 + $4 ship (for US buyers) and you get a whole extra pretty nice calculator as well.

As for size, the 17bII+ and DM42 are very close to the same height and width, while the DM42 is thinner, so it fits well in this case, but the old Pioneer leather cases are still nicer (even if more expensive)
--bob p

DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
Post Reply