Recently purchased a 41L and am unable to set up the putty software properly for moving programs etc (I think), I am up to chapter 6.5.2 'Connection' of the 'Voyager Series User Manual' and much to my despair cannot proceed.
How did you guys get your 41L's up and running?
HELP! Putty Configuration for DM41L
- Renketsu-88
- Posts: 3
- Joined: Mon Apr 26, 2021 11:12 pm
HELP! Putty Configuration for DM41L
DM 42, DM 41L, HP 35s, HP Prime & HP 17B
-
- Posts: 16
- Joined: Sun Mar 08, 2020 11:37 am
- Location: Sacramento, CA
Re: HELP! Putty Configuration for DM41L
I use tio under Linux but the info is here you might need:
Baud rate 38400 8 data bits 1 stop bit no parity
Tio sees the DM41L on /dev/ttyUSB0 and so would putty under Linux.
I find tio easier that putty because it works directly in the cli and that makes it easer to cut or paste the dump lines.
Code: Select all
tio -b 38400 -d 8 -f soft -s 1 -p none /dev/ttyUSB0
Tio sees the DM41L on /dev/ttyUSB0 and so would putty under Linux.
I find tio easier that putty because it works directly in the cli and that makes it easer to cut or paste the dump lines.
Happy DM41L user. Missing my HP75 and my original HP41C.