DM41X

Forum for discussion of the DM10, DM11, DM12, DM15, DM16 and DM41 units
mezoganet
Posts: 87
Joined: Tue Jan 22, 2019 12:54 pm
Location: Tours, France

Re: DM41X

Post by mezoganet » Wed Oct 16, 2019 5:03 pm

mezoganet wrote:
Wed Oct 16, 2019 4:57 pm
mezoganet wrote:
Wed Oct 16, 2019 4:50 pm
toml_12953 wrote:
Wed Oct 16, 2019 2:45 pm


Did you mean you don't like the landscape format? :oops:
Exactly and forever :cry:
Oh it’s just ok for an HP12c but NEVER for an HP41, never... not enough comfortable. I just can’t find my fingers.

Anyway it’s a very good clone, but just a clone. Nothing will give me back the “touch” of a real HP41... Except perhaps then forthcoming DM41X... wait and see.
HP33E, HP34C, HP41C, HP16C, HP28S, HP42S, HP48S, HP12C, HP35S, DM42, DM41L, DM15L, DM41X (SN#15) and HP3000 @ work during 18 yrs as IT Mgr

User avatar
Walter
Posts: 1226
Joined: Tue May 02, 2017 9:13 am
Location: Close to FRA, Germany

Re: DM41X

Post by Walter » Tue Oct 29, 2019 11:30 am

I know the video. Nevertheless, a picture of the 41X prototype (or deuterotype) featuring reasonable resolution would be highly appreciated on this forum, I bet.
DM42 SN: 00041 --- Follower of Platon.

HP-35, HP-45, ..., HP-50, WP 34S, WP 31S, DM16L

User avatar
Walter
Posts: 1226
Joined: Tue May 02, 2017 9:13 am
Location: Close to FRA, Germany

Re: DM41X

Post by Walter » Thu Jan 09, 2020 9:12 pm

Sometimes, you've to deliver yourself what you were requesting:
dm41x-alpha.jpg
dm41x-alpha.jpg (168.66 KiB) Viewed 561 times
(For reasons unknown, this was seen on another forum first instead of being launched on its home forum. :? If I'd run a company, I'd done this differently.)
Last edited by Walter on Thu Jan 09, 2020 9:20 pm, edited 1 time in total.
DM42 SN: 00041 --- Follower of Platon.

HP-35, HP-45, ..., HP-50, WP 34S, WP 31S, DM16L

User avatar
akaTB
Posts: 359
Joined: Tue May 02, 2017 11:56 am
Location: Milan, Italy

Re: DM41X

Post by akaTB » Thu Jan 09, 2020 9:20 pm

Walter wrote:
Thu Jan 09, 2020 9:12 pm
Sometimes, you've to deliver yourself what you were requesting:dm41x-alpha.jpg
(For reasons unknown, this was seen on another forum first instead of being launched on its home forum. :? )
So I'll repeat myself here:

OMG OMG OMG.
HOORAY!!!!
Greetings,
    Massimo

-+×÷ left is right and right is wrong :twisted: Casted in gold

User avatar
Walter
Posts: 1226
Joined: Tue May 02, 2017 9:13 am
Location: Close to FRA, Germany

Re: DM41X

Post by Walter » Thu Jan 09, 2020 9:25 pm

Now to the dumb questions: Assume PRN points to something like printing, doesn't it? What about CST, CONF, and SIZE?

Edit:
Found SIZE.
HP-41's CLST could be a candidate for CST - but a primary function for clearing the stack?!?
Still looking for the meaning of CONF.
Eagerly waiting for layout explanations.
DM42 SN: 00041 --- Follower of Platon.

HP-35, HP-45, ..., HP-50, WP 34S, WP 31S, DM16L

User avatar
Walter
Posts: 1226
Joined: Tue May 02, 2017 9:13 am
Location: Close to FRA, Germany

Re: DM41X

Post by Walter » Mon Jan 13, 2020 3:23 pm

Another guess: CST = CUSTOM ? But we have USeR already... :?
CONF smells like CONFIRM but not seen on the HP-41Cx AFAIK. :?

The world is full of riddles.
DM42 SN: 00041 --- Follower of Platon.

HP-35, HP-45, ..., HP-50, WP 34S, WP 31S, DM16L

rprosperi
Posts: 623
Joined: Mon Apr 24, 2017 5:48 pm
Location: New York

Re: DM41X

Post by rprosperi » Mon Jan 13, 2020 9:17 pm

Walter wrote:
Mon Jan 13, 2020 3:23 pm
Another guess: CST = CUSTOM ? But we have USeR already... :?
CONF smells like CONFIRM but not seen on the HP-41Cx AFAIK. :?
1. Correct, but not the same as USER
2. Incorrect.
3. SIZE is the normal HP-41C SIZE command (to set the # of data storage registers). The slot was available so we figured better to put something there. Religious wars have been fought over things like 'xxxx would have been a better choice' but USER mode makes it less of an issue.
--bob p

DM42: β00071 & 00282, DM41X: β00071, DM10L: 071/100

User avatar
akaTB
Posts: 359
Joined: Tue May 02, 2017 11:56 am
Location: Milan, Italy

Re: DM41X

Post by akaTB » Mon Jan 13, 2020 9:52 pm

Walter wrote:
Mon Jan 13, 2020 3:23 pm
Another guess: CST = CUSTOM ? But we have USeR already... :?
CONF smells like CONFIRM but not seen on the HP-41Cx AFAIK. :?

The world is full of riddles.
I bet CONF is "CONFusing Walter" :lol:
Greetings,
    Massimo

-+×÷ left is right and right is wrong :twisted: Casted in gold

User avatar
Walter
Posts: 1226
Joined: Tue May 02, 2017 9:13 am
Location: Close to FRA, Germany

Re: DM41X

Post by Walter » Mon Jan 13, 2020 10:25 pm

rprosperi wrote:
Mon Jan 13, 2020 9:17 pm
Walter wrote:
Mon Jan 13, 2020 3:23 pm
Another guess: CST = CUSTOM ? But we have USeR already... :?
CONF smells like CONFIRM but not seen on the HP-41Cx AFAIK. :?
1. Correct, but not the same as USER
2. Incorrect.
Thanks, Bob, for clarifying #1.
For #2, which part of my statement is incorrect? :?
DM42 SN: 00041 --- Follower of Platon.

HP-35, HP-45, ..., HP-50, WP 34S, WP 31S, DM16L

rprosperi
Posts: 623
Joined: Mon Apr 24, 2017 5:48 pm
Location: New York

Re: DM41X

Post by rprosperi » Mon Jan 13, 2020 11:08 pm

Walter wrote:
Mon Jan 13, 2020 10:25 pm
For #2, which part of my statement is incorrect? :?
You are correct that there is no Confirm on the 41CX, but your sense of smell needs some refinement.

Other hints will wait a day or so...
--bob p

DM42: β00071 & 00282, DM41X: β00071, DM10L: 071/100

Post Reply