Section 5.4.3, two example errors

Please report errors, omissions, corrections and suggestions for the DM32 User Manual and the built-in Quick Reference Guide.
Post Reply
Joe Horn
Posts: 108
Joined: Thu Oct 04, 2018 2:10 am

Section 5.4.3, two example errors

Post by Joe Horn »

In Section 5.4.3, there are two errors in the table of examples.

(1) The 3rd row says that if the "entered fraction" is 19/8255, then the "internal value" is "0.002301635372501501514…​". The digits which I underlined here (015) are extraneous (accidentally repeated) and should be deleted.

(2) The 4th row says that if you attempt to key in the fraction 654321.123.4567, you get a "warning annunciator" because "entry over 12-digit". But no such warning is issued, and no 12-digit limitation on fraction entry exists on the DM32, unlike the HP 32SII which has a 12-digit limit on integer part plus numerator. This entire row in the table should therefore be deleted.
User avatar
Emy
Posts: 103
Joined: Tue May 03, 2022 9:29 am
Location: Switzerland

Re: Section 5.4.3, two example errors

Post by Emy »

Thanks. Fixed for next version of the manual.
Post Reply