How fast is DM32?
How fast is DM32?
From swissmicros.com, it reads DM32 uses Cortex-M33 160MHz(at max) processor. I don't own DM32, but I wonder if it is significantly faster than DM42 or DM41X. Anyone tested it?
S.Korean / HP-50G | fx-570EX | fx-570CW | HP-200LX
Re: How fast is DM32?
Hello, I tested it (both calculators running on battery) with a program with a loop going from 1 to 7200, taking the sin of the loop variable and e^x of the result and adding up the result. Finally, the result is shown.
The program was for DM42:
01 LBL "TEST"
02 0
03 STO 00
04 STO 01
05 LBL 01
06 SIN
07 E^X
08 STO+00
09 1
10 STO+01
11 7200
12 RCL 01
13 X<Y?
14 GTO 01
15 RCL 00
16 RTN
For the DM32 it was likewise. Of course, the result was the same (9115,6743).
The execution time for the DM42: 25 seconds
For the DM 32: 8 seconds.
So it seems to be a factor of more than 3 in favor of the DM 32 if both run on battery.
With the power supply attached:
DM 42: Execution time is 10 seconds.
DM 32: Execution time is unchanged (8 seconds).
So the DM32 runs on battery a little bit faster than the DM42 with power supply.
I hope this helps a bit.
The program was for DM42:
01 LBL "TEST"
02 0
03 STO 00
04 STO 01
05 LBL 01
06 SIN
07 E^X
08 STO+00
09 1
10 STO+01
11 7200
12 RCL 01
13 X<Y?
14 GTO 01
15 RCL 00
16 RTN
For the DM32 it was likewise. Of course, the result was the same (9115,6743).
The execution time for the DM42: 25 seconds
For the DM 32: 8 seconds.
So it seems to be a factor of more than 3 in favor of the DM 32 if both run on battery.
With the power supply attached:
DM 42: Execution time is 10 seconds.
DM 32: Execution time is unchanged (8 seconds).
So the DM32 runs on battery a little bit faster than the DM42 with power supply.
I hope this helps a bit.
Re: How fast is DM32?
Comparison to the DM41X:
This is very slow compared to both DM42 and DM32:
Same program without power supply: 640 seconds.
With power supply: 325 seconds.
This is very slow compared to both DM42 and DM32:
Same program without power supply: 640 seconds.
With power supply: 325 seconds.
-
- Posts: 157
- Joined: Fri Apr 29, 2022 7:49 pm
Re: How fast is DM32?
DM42 plugged in with current C47 code: 124 seconds. (Same answer: 9115.6743.)
Battery: 470 seconds.
Battery: 470 seconds.
Re: How fast is DM32?
Thanks for these test results rawi, interesting for all readers here.
Regarding the question about a DM41X not running under NUT emulation, basically no, that won't happen. Redeveloping the 41CX from scratch is not a trivial task, in fact it's not even a large task, it's a huge, risky task, for no effective benefit, except being somewhat. Anyone needing calculations faster than the 41X (or the 41CL) provide really should be looking for more powerful tools, like the DM42, or 50g, Prime, etc.
Regarding the question about a DM41X not running under NUT emulation, basically no, that won't happen. Redeveloping the 41CX from scratch is not a trivial task, in fact it's not even a large task, it's a huge, risky task, for no effective benefit, except being somewhat. Anyone needing calculations faster than the 41X (or the 41CL) provide really should be looking for more powerful tools, like the DM42, or 50g, Prime, etc.
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
Re: How fast is DM32?
My HP32Sii ran a 'blistering' time of 15 mins 7 secs.
Re: How fast is DM32?
Speed tests can vary dramatically, depending on the nature of the program. I have run a speed test on my DM42 and DM32, both running on the battery, which yields the following results with 1000 in the X register when the program is executed:rawi wrote: ↑Thu Jun 08, 2023 3:03 pmHello, I tested it (both calculators running on battery) with a program with a loop going from 1 to 7200, taking the sin of the loop variable and e^x of the result and adding up the result. Finally, the result is shown.
The program was for DM42:
01 LBL "TEST"
02 0
03 STO 00
04 STO 01
05 LBL 01
06 SIN
07 E^X
08 STO+00
09 1
10 STO+01
11 7200
12 RCL 01
13 X<Y?
14 GTO 01
15 RCL 00
16 RTN
For the DM32 it was likewise. Of course, the result was the same (9115,6743).
The execution time for the DM42: 25 seconds
For the DM 32: 8 seconds.
So it seems to be a factor of more than 3 in favor of the DM 32 if both run on battery.
DM32: 4 seconds timed with a stopwatch
DM42: 6.8 seconds timed by the program
So, the difference between the speed of the DM32 and DM42 using my benchmark is less than suggested by your benchmark. No doubt other tests would produce different results.
The code for the DM32 is as follows:
LBL D
STO N
0
STO S
1
STO X
LBL L
ATAN
SIN
e^x
3
1/x
y^x
STO+ S
RCL X
1
+
STO X
DSE N
GTO L
RTN
The code for the DM42 is as follows:
LBL "SPEED"
STO "Loop"
TIME
→HR
STO 00
0
STO "Sum"
1
STO "X"
LBL 01
ATAN
SIN
E↑X
3
1/x
Y↑X
STO+ "Sum"
RCL "X"
1
+
STO "X"
DSE "Loop"
GTO 01
TIME
→HR
RCL- 00
3600
x
END
Last edited by HPMike on Sat Jun 10, 2023 3:44 am, edited 1 time in total.
DM15L, S/N 00548. DM42, SN: 00159. DM41X, SN: 00973. DM32, SN 00054.
-
- Posts: 2
- Joined: Wed Jan 22, 2020 10:58 pm
- Location: Dornach
Re: How fast is DM32?
9115.6743 and about 930sec on my HP32sII
Greetings from Basel
Greetings from Basel