The URL below points to a ZIP file with the most recent versions of my modules - plus a few extras: http://www.swissmicros.com/dm41x/fat/
Generally speaking the MOD files on that zip archive are identical to those found on www.hp41.org and other sources (pls. mind the revisions and release dates). I don't remember having to modify them for the DM41X, so they should all be 100% compatible (famous last words...) . Do report incidences if you run into some.
Remarks:
Most of the advanced modules use the LIBRARY #4 ROM. Make sure you always load that one/.
Some have different versions depending on the page# to plug it in:
- If you don't use the printer page#6 is available for the OSX_BSX4 and HEPAX_4F to use.
- page #7 is also available (no HP-IL folks), so those two above and the WARP_Core can be safely plugged in it as well.
Source for additional MOD files
Re: Source for additional MOD files
Ángel,
I think I found a discrepancy between the AMMC/OSX module and the manual. CAT”1 doesn’t bring up the selection menu as stated in the manual. CAT”0 however does bring up the menu. I assume this was a recent change that has not made it to the manual.
I think I found a discrepancy between the AMMC/OSX module and the manual. CAT”1 doesn’t bring up the selection menu as stated in the manual. CAT”0 however does bring up the menu. I assume this was a recent change that has not made it to the manual.
DM42:00584, DM41X: 00049, DM10L:021
Re: Source for additional MOD files
This did change with the latest OSX builds, and IMHO it's an excellent improvement. I found having to hit [1] twice slightly annoying to see CAT-1, now it's back to how God and HP intended it. And even when using HP-IL (which you can't on the 41X) how often did anyone use CAT-0 anyhow? A subtle but really appreciated change.
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
Re: Source for additional MOD files
Ahum! to double check after reorganizing an IL loop with several peripherals in it ?
I agree that today it is irrelevant on the DM41X but what if in some future HP-IL is implemented over USB ?
Anyway, it is easy to redo it in a FOCAL program.
[DM1x/DM1xL/DM41/DM41L/DM41X/DM42]
Re: Source for additional MOD files
And it's still there, anyway: just select '0' from the CAT-0 menu.
Cambridge, UK
41CL/DM41X 12/15C/16C DM15/16 17B/II/II+ 28S 42S/DM42 32SII 48GX 50g 35s WP34S PrimeG2 WP43S/pilot
Casio, Rockwell 18R
41CL/DM41X 12/15C/16C DM15/16 17B/II/II+ 28S 42S/DM42 32SII 48GX 50g 35s WP34S PrimeG2 WP43S/pilot
Casio, Rockwell 18R
-
- Posts: 146
- Joined: Mon Apr 24, 2017 8:19 pm
Re: Source for additional MOD files
That's correct: no loss of functionality with the move from CAT'1 to CAT'0.
In fact it's the other way around, now it's also covering CAT'7 : if the HP-IL Mass Storage is present it executes DIR, but if not it'll list the FAT of the module plugged in page#7
And "H" will call HEPDIR if the HEPAX is plugged in as well.
Re: Source for additional MOD files
An updated .zip file with the latest versions of Angel's .mod files has been posted in the 41X FAT area:
https://www.swissmicros.com/dm41x/fat/
https://www.swissmicros.com/dm41x/fat/
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
Re: Source for additional MOD files
What a service! (3)rprosperi wrote: ↑Wed Feb 26, 2020 9:00 pmAn updated .zip file with the latest versions of Angel's .mod files has been posted in the 41X FAT area:
https://www.swissmicros.com/dm41x/fat/
Greetings,
Massimo
ajcaton
-+×÷ left is right and right is wrong Casted in gold
Massimo
ajcaton
-+×÷ left is right and right is wrong Casted in gold
Re: Source for additional MOD files
Plugging in the new OS X_BS4X Module is causing my DM41X to immediately power off.rprosperi wrote: ↑Wed Feb 26, 2020 9:00 pmAn updated .zip file with the latest versions of Angel's .mod files has been posted in the 41X FAT area:
https://www.swissmicros.com/dm41x/fat/
Re: Source for additional MOD files
Do you have LIB4 loaded as well? Lib4 is essential for OSX.TwoWeims wrote: ↑Thu Feb 27, 2020 1:54 amPlugging in the new OS X_BS4X Module is causing my DM41X to immediately power off.rprosperi wrote: ↑Wed Feb 26, 2020 9:00 pmAn updated .zip file with the latest versions of Angel's .mod files has been posted in the 41X FAT area:
https://www.swissmicros.com/dm41x/fat/
I installed this same OSX (I use the Page-7 flavor) with no problems.
If you are loading LIB4 and still have the issue, try the Page-7 version and see if that's different.
What other modules are you trying to install at the same time.
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100