The Beta programme is where a device becomes fully formed. If you have any suggestions for features to integrate into the DM41X then feel free to make them here. We can't guarantee that they'll all end up in the final product but we'll certainly consider all sensible proposals.
Ángel Martin
Posts: 145 Joined: Mon Apr 24, 2017 8:19 pm
Post
by Ángel Martin » Thu Feb 13, 2020 5:22 pm
Not sure if my IR printer is misbehavin' or the program has issues... just dug it up from a heap of very old & forgotten listings, maybe somebody can take it for a spin with a validated printer...
Code: Select all
1 LBL "PLOT"
2 "F. NAME ?"
3 AON
4 PROMPT
5 ASTO 20
6 AOFF
7 "X INIT=?"
8 PROMPT
9 STO 14
10 "“X END=?"
11 PROMPT
12 STO 16
13 "Y MAX=?"
14 PROMPT
15 STO 10
16 STO 01
17 "Y MIN=?"
18 PROMPT
19 STO 11
20 STO 00
21 -
22 133
23 /
24 STO 12
25 LBL E
26 "X INC=?"
27 PROMPT
28 STO 13
29 "X AXIS=?"
30 PROMPT
31 STO 04
32 LBL "PLOTP"
33 RCL 04
34 RCL 11
35 -
36 RCL 12
37 /
38 ,5
39 +
40 INT
41 ,127
42 +
43 STO 18
44 ADV
45 " PLOT OF "
46 ARCL 20
47 PRA
48 " X <UNITS= 1"
49 >",> "
50 ACA
51 7
52 ACCHR
53 PRBUF
54 133
55 STO 02
56 XROM "PRAXIS"
57 RCL 16
58 ABS
59 RCL 14
60 ABS
61 X<Y?
62 X<>Y
63 LOG
64 INT
65 2
66 -
67 CHS
68 FIX IND X
69 LBL A
70 ,006
71 STO 15
72 RCL 18
73 STO 07
74 LBL 01
75 RCL 14
76 XEQ IND 20
77 RCL 11
78 -
79 RCL 12
80 /
81 INT
82 2
83 RCL 15
84 INT
85 Y^X
86 E-3
87 *
88 +
89 STO IND 15
90 RCL 13
91 ST+ 14
92 ISG 15
93 GTO 01
94 4
95 *
96 ST+ 14
97 XEQ D
98 RCL 16
99 RCL 14
100 X<=Y?
101 GTO A
102 RTN
103 LBL D
104 SF 00
105 ,006
106 STO 08
107 LBL 21
108 RCL 08
109 1,001
110 +
111 STO 09
112 RCL 08
113 RCL IND 08
114 LBL 22
115 RCL IND 09
116 X>Y?
117 GTO 23
118 RCL 09
119 X<>Y
120 ENTER^
121 LBL 23
122 RDN
123 ISG 09
124 GTO 22
125 RCL IND 08
126 STO IND Z
127 RDN
128 STO IND 08
129 ISG 08
130 GTO 21
131 CF 00
132 CLX
133 STO 08
134 STO 17
135 ,007
136 STO 15
137 RCL 14
138 RCL 13
139 11
140 *
141 -
142 ACX
143 LBL 11
144 RCL 15
145 E
146 +
147 STO 19
148 RCL IND 15
149 STO 09
150 INT
151 LBL 12
152 RCL IND 19
153 INT
154 X#Y?
155 GTO 13
156 LASTX
157 FRC
158 ST+ 09
159 RDN
160 E
161 ST+ 15
162 RDN
163 ISG 19
164 GTO 12
165 LBL 13
166 RCL IND 15
167 INT
168 RCL 17
169 -
170 ST+ 17
171 E
172 -
173 SKPCOL
174 RCL 09
175 FRC
176 E3
177 *
178 127
179 X<Y?
180 X<>Y
181 X<>Y
182 ACCOL
183 ISG 15
184 GTO 11
185 132
186 RCL 17
187 -
188 E
189 -
190 SKPCOL
191 ADV
192 END
Attachments
HIGHRES.RAW
(512 Bytes) Downloaded 245 times
rprosperi
Posts: 1703 Joined: Mon Apr 24, 2017 7:48 pm
Location: New York
Post
by rprosperi » Thu Feb 13, 2020 11:26 pm
Ángel Martin wrote: ↑ Thu Feb 13, 2020 5:22 pm
...maybe somebody can take it for a spin with a validated printer...
Some suggestion on parameters to use would help please... I've no idea what this does
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
toml_12953
Posts: 795 Joined: Wed May 03, 2017 7:46 pm
Location: Malone, NY USA
Post
by toml_12953 » Thu Feb 13, 2020 11:44 pm
rprosperi wrote: ↑ Thu Feb 13, 2020 11:26 pm
Ángel Martin wrote: ↑ Thu Feb 13, 2020 5:22 pm
...maybe somebody can take it for a spin with a validated printer...
Some suggestion on parameters to use would help please... I've no idea what this does
All I get is a DATA ERROR.
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
toml_12953
Posts: 795 Joined: Wed May 03, 2017 7:46 pm
Location: Malone, NY USA
Post
by toml_12953 » Thu Feb 13, 2020 11:51 pm
toml_12953 wrote: ↑ Thu Feb 13, 2020 11:44 pm
rprosperi wrote: ↑ Thu Feb 13, 2020 11:26 pm
Ángel Martin wrote: ↑ Thu Feb 13, 2020 5:22 pm
...maybe somebody can take it for a spin with a validated printer...
Some suggestion on parameters to use would help please... I've no idea what this does
All I get is a name and labels, then the Y-axis printed and NONEXISTENT. Am I supposed to enter a function somewhere?
Ohhh! I see now. The first prompt NAME is the name of the function to be plotted.
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
toml_12953
Posts: 795 Joined: Wed May 03, 2017 7:46 pm
Location: Malone, NY USA
Post
by toml_12953 » Fri Feb 14, 2020 12:04 am
Ángel Martin wrote: ↑ Thu Feb 13, 2020 5:22 pm
Not sure if my IR printer is misbehavin' or the program has issues... just dug it up from a heap of very old & forgotten listings, maybe somebody can take it for a spin with a validated printer...
Now that I figured out what it's looking for it works OK on my 82240B.
The plot points look like small lines. Is this right?
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Ángel Martin
Posts: 145 Joined: Mon Apr 24, 2017 8:19 pm
Post
by Ángel Martin » Fri Feb 14, 2020 6:55 am
toml_12953 wrote: ↑ Fri Feb 14, 2020 12:04 am
Now that I figured out what it's looking for it works OK on my 82240B.
The plot points look like small lines. Is this right?
it's supposed to plot the curve, so each printer head stroke needs to draw the shape of the curve in that tiny space. Try it with sin x in DEG mode between 0 and 180, increments of 5 deg...
toml_12953
Posts: 795 Joined: Wed May 03, 2017 7:46 pm
Location: Malone, NY USA
Post
by toml_12953 » Fri Feb 14, 2020 2:14 pm
Ángel Martin wrote: ↑ Fri Feb 14, 2020 6:55 am
toml_12953 wrote: ↑ Fri Feb 14, 2020 12:04 am
Now that I figured out what it's looking for it works OK on my 82240B.
The plot points look like small lines. Is this right?
it's supposed to plot the curve, so each printer head stroke needs to draw the shape of the curve in that tiny space. Try it with sin x in DEG mode between 0 and 180, increments of 5 deg...
Here's what it looks like on my DM 41X. The X-Axis isn't complete:
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Ángel Martin
Posts: 145 Joined: Mon Apr 24, 2017 8:19 pm
Post
by Ángel Martin » Fri Feb 14, 2020 2:23 pm
toml_12953 wrote: ↑ Fri Feb 14, 2020 2:14 pm
Here's what it looks like on my DM 41X. The X-Axis isn't complete:
ok, we're getting close... I'll double check the listing - thanks for doing the testing!
Ángel Martin
Posts: 145 Joined: Mon Apr 24, 2017 8:19 pm
Post
by Ángel Martin » Fri Feb 14, 2020 2:44 pm
Ángel Martin wrote: ↑ Fri Feb 14, 2020 2:23 pm
toml_12953 wrote: ↑ Fri Feb 14, 2020 2:14 pm
Here's what it looks like on my DM 41X. The X-Axis isn't complete:
ok, we're getting close... I'll double check the listing - thanks for doing the testing!
That's a strange zero axis, Can you try with xmin = -0.1 and xmax = 1.1 ?
toml_12953
Posts: 795 Joined: Wed May 03, 2017 7:46 pm
Location: Malone, NY USA
Post
by toml_12953 » Fri Feb 14, 2020 3:54 pm
Ángel Martin wrote: ↑ Fri Feb 14, 2020 2:44 pm
Ángel Martin wrote: ↑ Fri Feb 14, 2020 2:23 pm
toml_12953 wrote: ↑ Fri Feb 14, 2020 2:14 pm
Here's what it looks like on my DM 41X. The X-Axis isn't complete:
ok, we're getting close... I'll double check the listing - thanks for doing the testing!
That's a strange zero axis, Can you try with xmin = -0.1 and xmax = 1.1 ?
Do you mean ymin and ymax? If so, I get a DATA ERROR after x=165. 110 is the last line printed when I do that.
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)