Hi
I like to have follwing commands directly in the 41OS: (without using the setup menu)
"FILENAM" XEQ "FLSAVE" -> Save the Focal Programm in flash as .RAW
"FILENAM" XEQ "FLLOAD" -> Load FOCAL .RAW from flash to the DM41X memory
"FILENAM" XEQ "FLXSAVE" -> Save the X-Memory to flash
"FILENAM" XEQ "FLXLOAD" -> Load the X-Memory to flash
and for ROM (RAM) pages:
X=<Port> "FILENAM" XEQ "FLRSAVE" -> Save the ROM in Port (X>=8<=15) to flash
X=<Port> "FILENAM" XEQ "FLRLOAD" -> Load the ROM in Port (X) to flash
Thank you for thinking about it...
I like the DM41X very much!! Great Work!
Best regards
Tobie
Save FOCAL's and ROM's from the 41OS
- charger73@gmx.ch
- Posts: 14
- Joined: Mon Nov 06, 2017 8:41 am
- Location: Trimbach
Re: Save FOCAL's and ROM's from the 41OS
Yes, that would be great indeed! Much better than having to use a menu.
DM42 s/n 06181 DM41X s/n \(\beta\)0005 (sold)
-
- Posts: 146
- Joined: Mon Apr 24, 2017 8:19 pm
Re: Save FOCAL's and ROM's from the 41OS
Save FOCAL's and ROM's from the 41OS
???
Is it possible ?
Wahoouhhh ... some clues for a newbie since 1979...
Was away from Hp41 and Focal.
Any "quick" help ?
Thanks a lot !
???
Is it possible ?
Wahoouhhh ... some clues for a newbie since 1979...
Was away from Hp41 and Focal.
Any "quick" help ?
Thanks a lot !
Last edited by mezoganet on Wed Feb 19, 2020 1:24 am, edited 1 time in total.
HP33E, HP34C, HP41C, HP16C, HP28S, HP42S, HP48S, HP12C, HP35S, DM42, DM41L, DM15L, DM41X (SN#15) and HP3000 @ work during 18 yrs as IT Mgr
-
- Posts: 328
- Joined: Wed May 24, 2017 10:44 pm
- Location: Vancouver Canada
- Contact:
Re: Save FOCAL's and ROM's from the 41OS
Excellent idea! Nice to be key assignable.
Why not mimic the extended memory commands:
EXTENDED = EXTENDED MIMIC = YOURS
____________________________
SAVEP = PSAVE = FLSAVE
GETP = PGET = FLLOAD
PURFL = FLPUR = xxxxx
Why not mimic the extended memory commands:
EXTENDED = EXTENDED MIMIC = YOURS
____________________________
SAVEP = PSAVE = FLSAVE
GETP = PGET = FLLOAD
PURFL = FLPUR = xxxxx
Re: Save FOCAL's and ROM's from the 41OS
While these are great ideas, I would not like to see any additions to the base OS. The DM41X should be in essence as close to an actual 41CX as possible. I think the object of this project was not to develop a new calculator but to faithfully reproduce the HP-41 experience with modern hardware.
Perhaps a new ROM could be developed that would incorporate all of the good ideas that were not original features?
Perhaps a new ROM could be developed that would incorporate all of the good ideas that were not original features?
-
- Posts: 328
- Joined: Wed May 24, 2017 10:44 pm
- Location: Vancouver Canada
- Contact:
Re: Save FOCAL's and ROM's from the 41OS
Yes,
Stay original. We all learned that on the DM 42.
These options could be added to the plugged in DM41X ROM which stays resident at all time. It would be an addendum to that ROM which already adds the FLASH ROM state and file saving abilities. Being a ROM it would then have key assignable commands.
Cheers
Stay original. We all learned that on the DM 42.
These options could be added to the plugged in DM41X ROM which stays resident at all time. It would be an addendum to that ROM which already adds the FLASH ROM state and file saving abilities. Being a ROM it would then have key assignable commands.
Cheers
-
- Posts: 58
- Joined: Mon Jan 13, 2020 4:49 pm
- Location: Netherlands
Re: Save FOCAL's and ROM's from the 41OS
Yep
Greetings,
Massimo
ajcaton
-+×÷ left is right and right is wrong Casted in gold
Massimo
ajcaton
-+×÷ left is right and right is wrong Casted in gold
-
- Posts: 1107
- Joined: Tue May 02, 2017 5:48 pm
- Location: Netherlands
- Contact: