You're right. After much effort to get all these subtle notes added, I got this one exactly backwards. Thanks for the comment!HPMike wrote: ↑Sat Nov 14, 2020 7:11 pmThere is an error in the DM41X User Manual v1.12 in Section 3.1.2. Regarding use of the Thermal Printer, there is an informational note regarding VIEW and AVIEW that states that "If you have the Thermal Printer module installed, and no thermal printer is being used, program execution will halt when encountering a VIEW or AVIEW instruction." This is incorrect, and should say "will not halt." When operating normally, VIEW and AVIEW halt execution, and when the Thermal Printer module is plugged in, VIEW and AVIEW do not operate normally, which is why the Thermal printer module must be unplugged to obtain normal operation.
DM41X V2.1
Re: DM41X V2.1
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
Re: DM41X V2.1
Another minor error in the User Manual. In Section 6.2.4. Save RAW Program, the current program is shown on line 3 of SI mode, not line 2 as stated in the Manual.
DM15L, S/N 00548. DM42, SN: 00159. DM41X, SN: 00973. DM32, SN 00054.
Re: DM41X V2.1
The header is not considered a 'line' of the stated view. The '1st' line of a view is always the line just below the header. This should be consistent throughout the manual, but please feel free to note inconsistencies if you see any.
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
Re: DM41X V2.1
Nope, it IS the third line, not including the header. You even state this in Section 3.1.2.
DM15L, S/N 00548. DM42, SN: 00159. DM41X, SN: 00973. DM32, SN 00054.
- Mark Hardman
- Posts: 118
- Joined: Wed May 03, 2017 3:26 am
- Location: Houston, TX
Re: DM41X V2.1
Updated without issue.
This works correctly if you use the "Format FAT Disk" option. If you format as part of the "FAT Disk Media Test", then not all directories are created.
DM42: β00043, β00065, 00357 / DM41X: β00054, 00445 / DM32: β00278
DM10L: 017/100, DM11L: 00121, DM12L: 02005, DM15L: 00523, DM16L: 00008, DM41L: 00111
DM10L: 017/100, DM11L: 00121, DM12L: 02005, DM15L: 00523, DM16L: 00008, DM41L: 00111
Re: DM41X V2.1
Thanks Mark. I've passed this on.Mark Hardman wrote: ↑Sun Nov 15, 2020 4:46 amThis works correctly if you use the "Format FAT Disk" option. If you format as part of the "FAT Disk Media Test", then not all directories are created.
There are only 10 kinds of people in the world: those who understand binary and those who do not.
Re: DM41X V2.1
Quite right, the current program name is seen in the 3rd line of the SI View. 'line 2' will be corrected next time around. Thx.
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
Re: DM41X V2.1
excellent release, thanks!
PWRX's ROMLST, PG? & ROM? functions all show it, however.
I notice that the XROM# for LIBRARY4 (35) is not shown at either of the above.
PWRX's ROMLST, PG? & ROM? functions all show it, however.
Cambridge, UK
41CL/DM41X 12/15C/16C DM15/16 17B/II/II+ 28S 42S/DM42 32SII 48GX 50g 35s WP34S PrimeG2 WP43S/pilot
Casio, Rockwell 18R
41CL/DM41X 12/15C/16C DM15/16 17B/II/II+ 28S 42S/DM42 32SII 48GX 50g 35s WP34S PrimeG2 WP43S/pilot
Casio, Rockwell 18R
- Dan Simpson
- Posts: 105
- Joined: Wed Mar 18, 2020 3:29 pm
- Location: Arizona
Re: DM41X V2.1
Successful update on Saturday the 14th!Over_score wrote: ↑Sat Nov 14, 2020 9:39 amDon't be superstitious: it brings bad luck!Mark Hardman wrote: ↑Sat Nov 14, 2020 5:30 amFriday the 13th, 2020 at that.Dan Simpson wrote: ↑Sat Nov 14, 2020 2:24 amUpgrade on FRIDAY THE 13th!?
I'm waiting till tomorrow!
I might wait until next year!
Black Cat locked outside, ladders and mirrors stowed away, and fingers crossed!
Thanks to everyone for their hard work on this project!
My Collection: HP-55, HP-67 (Teenix Mod), HP-15C, HP-16C, HP-41CV, HP-41CX, SY41-CL, DM41X, DM42, HP-42S, HP-48G, HP-71B, HP-75C, HP-86B.
Re: DM41X V2.1
None of this was necessary, the 41 has a key to change signsDan Simpson wrote: ↑Mon Nov 16, 2020 10:48 pmSuccessful update on Saturday the 14th!
Black Cat locked outside, ladders and mirrors stowed away, and fingers crossed!
My programmable calculators - former: CBM PR100, HP41CV, HP28S, HP11C - current: HP48G(256kB), HP35S, Prime, DM41X, DM42