Great upgrade !!
Good job. Thanks a lot.
DM41X v1.11t08: 2020-03-30
- PierreMengisen
- Posts: 306
- Joined: Wed Nov 29, 2017 1:38 pm
- Location: Neuchâtel CH
DM41X v1.11t08: 2020-03-30
Pierre
[TI59 with PC100C; TI-84 Plus CE-T; HP41CV with HP IL loop & 2*82161A DCD & 82162 TP; HP15C; HP28S; DM41; DM41L; DM42; DM41X]
[TI59 with PC100C; TI-84 Plus CE-T; HP41CV with HP IL loop & 2*82161A DCD & 82162 TP; HP15C; HP28S; DM41; DM41L; DM42; DM41X]
Re: DM41X v1.11t08: 2020-03-30
There is a new 'BETA-3' DM41X release available on the SM site here (as Pierre discovered!):
http://www.swissmicros.com/dm41x/firmware/
(file DMCP_flash_3.18t03_DM41-1.11t08.bin)
This is a brief summary of the DM41X changes in this release:
- Added Module ROM Map screen ([shift] [SETUP] [2] [5])
.....Currently installed modules shown in the right column (module-1, module-2, etc.)
.....Viewing Pages 0-7 or 8-F toggled by F1 key
.....F2 key toggles display of ROM Number (internal) vs. ROM ID
- Fixed strange jumps by more then 30 hours in StopWatch mode
- Fixed weak response to [R/S] key in CAT-4 ([R/S] key to stop CAT display did not always respond)
- Fixed up/down key response in catalogs (including HEPAX extended CAT modes)
- New menu item for deleting modules from flash memory ([shift] [SETUP] [2] [3])
.....Removes current AM configuration, and clears all modules installed in Flash (but not in FAT /MODS folder)
These changes were made to DMCP in this release:
- Fixed labels for date format change in 'Set Date' screen to match 'Set Time' time format change.
- Fixed file filtering problem in file list screens
http://www.swissmicros.com/dm41x/firmware/
(file DMCP_flash_3.18t03_DM41-1.11t08.bin)
This is a brief summary of the DM41X changes in this release:
- Added Module ROM Map screen ([shift] [SETUP] [2] [5])
.....Currently installed modules shown in the right column (module-1, module-2, etc.)
.....Viewing Pages 0-7 or 8-F toggled by F1 key
.....F2 key toggles display of ROM Number (internal) vs. ROM ID
- Fixed strange jumps by more then 30 hours in StopWatch mode
- Fixed weak response to [R/S] key in CAT-4 ([R/S] key to stop CAT display did not always respond)
- Fixed up/down key response in catalogs (including HEPAX extended CAT modes)
- New menu item for deleting modules from flash memory ([shift] [SETUP] [2] [3])
.....Removes current AM configuration, and clears all modules installed in Flash (but not in FAT /MODS folder)
These changes were made to DMCP in this release:
- Fixed labels for date format change in 'Set Date' screen to match 'Set Time' time format change.
- Fixed file filtering problem in file list screens
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
- Dan Simpson
- Posts: 105
- Joined: Wed Mar 18, 2020 3:29 pm
- Location: Arizona
Re: DM41X v1.11t08: 2020-03-30
Thanks, Bob!
I loaded the update and all is well so far.
I LOVE the module map screen! This is very helpful.
Thank you and the SwissMicros guys for your hard work!
I loaded the update and all is well so far.
I LOVE the module map screen! This is very helpful.
Thank you and the SwissMicros guys for your hard work!
My Collection: HP-55, HP-67 (Teenix Mod), HP-15C, HP-16C, HP-41CV, HP-41CX, SY41-CL, DM41X, DM42, HP-42S, HP-48G, HP-71B, HP-75C, HP-86B.
-
- Posts: 58
- Joined: Mon Jan 13, 2020 4:49 pm
- Location: Netherlands
Re: DM41X v1.11t08: 2020-03-30
Thanks for the update, great work on the ROM map!
Regards from NL,
Meindert Kuipers DM41X #48
Meindert Kuipers DM41X #48
Re: DM41X v1.11t08: 2020-03-30
I've loaded the update - flawless as usual.
Thanks a million for this excellent calculator with this excellent support!
smp
Thanks a million for this excellent calculator with this excellent support!
smp
Stephen
- - - - -
DM41X Beta SN: 00027
- - - - -
DM41X Beta SN: 00027
-
- Posts: 328
- Joined: Wed May 24, 2017 10:44 pm
- Location: Vancouver Canada
- Contact:
Re: DM41X v1.11t08: 2020-03-30
Thanks for the update! What a pleasure the update routine is.
Geoff
Geoff
-
- Posts: 84
- Joined: Mon Mar 16, 2020 9:37 am
- Location: France
Re: DM41X v1.11t08: 2020-03-30
Again, ...
Very very nice job !!
Olivier
Very very nice job !!
Olivier
Olivier de Nantes (Bretagne)
HP41 (x3 : 2CV / 1CX), HP 42S, HP 48G+, HP 71B, HP 15C LE, HP 35S, HP PRIME
DM41L, DM 41X (Beta - SN: 00078), DM 42 (SN: 1028)
HP41 (x3 : 2CV / 1CX), HP 42S, HP 48G+, HP 71B, HP 15C LE, HP 35S, HP PRIME
DM41L, DM 41X (Beta - SN: 00078), DM 42 (SN: 1028)
Re: DM41X v1.11t08: 2020-03-30
Thanks for this. Many thanks and indeed the update routine is so smooth, heaven on earth compared to the early days DM42.
I've tested the new functionality: works as described.
I've tested the new functionality: works as described.
DM41X beta: SN00018.
DM41X: SN00496.
DM42 beta: SN00074.
DM42:SN06020.
DM42 converted to C47 SN08973
DM10L: SN056/100.
DM11L: SN 02058.
DM15L: SN2074.
DM16L: SN2156.
DM15, DM16, DM41
and a whole bunch of the original HP's,
DM41X: SN00496.
DM42 beta: SN00074.
DM42:SN06020.
DM42 converted to C47 SN08973
DM10L: SN056/100.
DM11L: SN 02058.
DM15L: SN2074.
DM16L: SN2156.
DM15, DM16, DM41
and a whole bunch of the original HP's,
Re: DM41X v1.11t08: 2020-03-30
Just updated, no issues. Really like the module map. Really helps with figuring out which port the module is plugged into and identifying conflicts. Thanks.
DM42:00584, DM41X: 00049, DM10L:021
-
- Posts: 2
- Joined: Thu Mar 05, 2020 6:55 pm
Re: DM41X v1.11t08: 2020-03-30
Hello,
Thank you for this update. It works well. The Module ROM Map option is fine.
Thank you again for your work.
Jean-Marc
Thank you for this update. It works well. The Module ROM Map option is fine.
Thank you again for your work.
Jean-Marc
HP12C-HP15C-HP35S-HP48S-HP50G-HPPrime-DM42-betaDM41X-