Key overlay - MS Word version

Discussion about the new DM41X calculator
Post Reply
WLue
Posts: 2
Joined: Wed Oct 07, 2020 11:01 am

Key overlay - MS Word version

Post by WLue »

I made a key overlay utillizing the "table" function in MS Word . The word file is attached (*.docx format). You may use/adapt it for your own needs.
DM41X_standard_overlay_installed.jpg
DM41X_standard_overlay_installed.jpg (162.47 KiB) Viewed 279 times
This is the procedure:
1. Print out on standard copy paper (80grs/sqm). Alter key names before, if and as required.
2. Laminate with 80 mics stock (result is a thickness of about 0,25 mm).
2. Cut out voids for keys and perimeter. Attention: Tabs as shown are too wide and too long, cut smaller.

Regards,

Werner
Attachments
DM41X_Standard_Keyboard_Overlay.docx
(20.12 KiB) Downloaded 53 times
amafan
Posts: 33
Joined: Tue Sep 29, 2020 11:40 pm

Re: Key overlay - MS Word version

Post by amafan »

Thank you. I really appreciate this. Be well.
DM41X (#6476), 42 (#458) - HP 17BII, 35(2), 45, HP 27S, 28S, 30B, 41CV, 42S, 48S, 35S, HP10bII+, 12C PLAT
I may have a problem!
hpgene
Posts: 24
Joined: Mon May 29, 2017 3:02 pm

Re: Key overlay - MS Word version

Post by hpgene »

Here's a draft modification of that file for the Sandmath module. If anyone can take this and run with it...

It is not complete!

Gene
Attachments
DM41X_SandMath_Keyboard_Overlay_DRAFT.docx
(21.23 KiB) Downloaded 41 times
hpgene
Posts: 24
Joined: Mon May 29, 2017 3:02 pm

Re: Key overlay - MS Word version

Post by hpgene »

Updated... much more complete for Sandmath.
Attachments
DM41X_SandMath_Keyboard_Overlay_V2.docx
(22.64 KiB) Downloaded 38 times
Post Reply