This picture clearly proves that centering is possible on the calculator rear.
(Background: Some weeks ago, an employee of SwissMicros claimed that being impossible. Hopefully he reads this ... )
Launching the DM41X
Re: Launching the DM41X
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
Re: Launching the DM41X
I remember a HP advertisement in the Netherlands painted under a bridge.
If the bridge opened you could see "niets is onmogelijk" = nothing is impossible.
After some weeks someone added the text "als je het zelf niet hoeft te doen" = if you don't have to do it yourself.
Think it was the bridge in Aalsmeer at the N201, that was more than 20 years ago.
If the bridge opened you could see "niets is onmogelijk" = nothing is impossible.
After some weeks someone added the text "als je het zelf niet hoeft te doen" = if you don't have to do it yourself.
Think it was the bridge in Aalsmeer at the N201, that was more than 20 years ago.
HP41C (2x), HP41CV, HP41CX, DM41X β, DM41X, DM42, HP11C, HP48G, HP97
Re: Launching the DM41X
Well, I guess it all depends on the tolerancing...
Did you ask for a specific precision?
Last edited by gmac42 on Sat Sep 26, 2020 2:16 am, edited 1 time in total.
DM41X #542, DM42 #650, DM41L #801, HP 41CX, HP 41CV, HP 50G, HP11C, TI 89
Re: Launching the DM41X
The calculator has been ordered, now the waiting start ... I will report back my first impressions when I have it.
Sylvain
Sylvain
[DM1x/DM1xL/DM41/DM41L/DM41X/DM42]
Re: Launching the DM41X
SwissMicros is the only company I know working without tolerances (this is what Michael claims at least). Just FYI.
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
Re: Launching the DM41X
Ah the famous tolerances, accuracy and uncertainty discussion.SwissMicros is the only company I know working without tolerances (this is what Michael claims at least). Just FYI.
Its very well possible to work without the first but the other two will always be there
Edit: just placed my order
HP41C (2x), HP41CV, HP41CX, DM41X β, DM41X, DM42, HP11C, HP48G, HP97
- Over_score
- Posts: 160
- Joined: Fri May 05, 2017 9:37 pm
- Location: France
Re: Launching the DM41X
Others didn't know it was impossible, so they did it!
DM42 SN00284 & SN03835 running C47, HP34C, HP41CV, HP42S, HP35s, WP34S, HP Prime
Re: Launching the DM41X
Great News !
DM41X is available just in time before the end of Q3 2020 as stated initialy by SM
Swiss precision.
As for the tolerances joke ....
ie: my DM42 had its stamping back skewed (typical spring effect under stamping press, or heat treatment operation for the PVD ?) and i had to open the calculator in order to "massage" the stamping until it can stay flat on the table. Fortunately it was not made out of 1.4310C1300 stainless spring steel (SUS301)
To be honest, this is tricky business for such low volume production. The stamper can't spend one day setting up the tools for each production batch.
Furthermore, if he has no tolerances on the drawing, all is fine for him.
As for the DM41X, can we have some feedback from the beta testers ?
Some full review, including the best HP41ROMs somewhere ? (Youtube would be great)
DM41X is available just in time before the end of Q3 2020 as stated initialy by SM
Swiss precision.
As for the tolerances joke ....
ie: my DM42 had its stamping back skewed (typical spring effect under stamping press, or heat treatment operation for the PVD ?) and i had to open the calculator in order to "massage" the stamping until it can stay flat on the table. Fortunately it was not made out of 1.4310C1300 stainless spring steel (SUS301)
To be honest, this is tricky business for such low volume production. The stamper can't spend one day setting up the tools for each production batch.
Furthermore, if he has no tolerances on the drawing, all is fine for him.
As for the DM41X, can we have some feedback from the beta testers ?
Some full review, including the best HP41ROMs somewhere ? (Youtube would be great)
DM41L SN01063 - DM42 SN05658 - DM15L SN20438 - DM41X SN00173 - DM16L SN04449
Re: Launching the DM41X
Pay us, so we can buy a production item.
Greetings,
Massimo
ajcaton
-+×÷ left is right and right is wrong Casted in gold
Massimo
ajcaton
-+×÷ left is right and right is wrong Casted in gold
Re: Launching the DM41X
This is a truism - everybody knows this except one special Swiss company whose name shall not be mentioned here.
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041