This is on MacOS Ventura 13.2.1 x86_64
I followed the setup instructions on the c43 wiki "Build Setup", using the MacOS Homebrew method. I didn't follow the steps for building DMCP, or modifying code.
Then:
Code: Select all
make clean
make
./wp43
I remove backup.bin before running wp43, in case anything there was causing an issue.
I then enter: 30, and single-click on SIN. Gives me 0.5 as expected.
Then click on f/g, and the f appears in the display.
Then click on SIN, and ARCSIN appears in the display for a second, followed by NOP. The NOP remains visible. The ARCSIN does not execute. It does not seem to be long-press cycling, since neither SIN, nor LINPOL appear (they do when I long-press SIN).
The f press does not produce any cmdline output; the following SIN press produces:
Code: Select all
>>> refreshScreenCounter=29 calcMode=0 last_CM=0 doRefreshSoftMenu=1 screenUpdatingMode=0
>>> screen.c: clearScreen: clearScreenCounter=24
>>> refreshScreenCounter=30 calcMode=0 last_CM=0 doRefreshSoftMenu=0 screenUpdatingMode=0
>>> screen.c: clearScreen: clearScreenCounter=25
>>>> processKeyAction: item=83 programRunStop=0
Switch - default: processKeyAction: calcMode=0 itemToBeAssigned=-32768 item=83
Long-press cycling works fine on the Function & Math keys, and after f/g on the lower keys.
I'd like to get this working, so if you need more info, please let me know.