WP43 News

This area is for discussion about these families of custom high-end Scientific Calculator applications for SwissMicros devices.
User avatar
PierreMengisen
Posts: 305
Joined: Wed Nov 29, 2017 1:38 pm
Location: Neuchâtel CH

Re: 43S News

Post by PierreMengisen »

Walter wrote:
Fri May 28, 2021 11:16 pm
I've got some idea of color blindness (various kinds) but couldn't find anything significant about contrast color blindness. Can you enlighten me about specific challenges, please?
OK. mon défaut est décelé par un test d'Ishihara. J'ai une forme de "protoanomalie". Mes bâtonnets détecteurs du rouge on une anomalie qui fait que je contraste mal le rouge sur fond de vert par exemple. Je vois les deux couleurs séparément, mais pas bien si elles sont mélangées en petits aplats. Une autre caractéristique de mom dérèglements des pigments des bâtonnets du rouge est que je suis capable de percevoir légèrement dans les infrarouges.
Après être plongé pendant environ ½ heure dans le noir total, je vois la chaleur dégagée par un corps humain. Je ne connais personne dans mon cas, mais j'en suis un.

OK. My defect is detected by an Ishihara test. I have a form of "protoanomaly". My red detector rods have an anomaly which makes me contrast badly the red on a green background for example. I see the two colors separately, but not well if they are mixed in small flat areas. Another characteristic of my red rod pigment disorder is that I am able to perceive slightly in the infrared.
After being immersed for about ½ hour in total darkness, I can see the heat given off by a human body. I don't know anyone in my case, but I am one.
Pierre
[TI59 with PC100C; TI-84 Plus CE-T; HP41CV with HP IL loop & 2*82161A DCD & 82162 TP; HP15C; HP28S; DM41; DM41L; DM42; DM41X]
User avatar
PierreMengisen
Posts: 305
Joined: Wed Nov 29, 2017 1:38 pm
Location: Neuchâtel CH

Re: 43S News

Post by PierreMengisen »

As for the OWNER'S MANUAL I think it's a bit too early to make definitive corrections. In the meantime I have listed the layout references that are currently incorrect. They are the references on pages 83, 131, 132, 142 (2*), 146, 150, 270, 276 and 281. Control made on the WP 43S U v0.20 version.
Pierre
[TI59 with PC100C; TI-84 Plus CE-T; HP41CV with HP IL loop & 2*82161A DCD & 82162 TP; HP15C; HP28S; DM41; DM41L; DM42; DM41X]
User avatar
Walter
Posts: 3070
Joined: Tue May 02, 2017 11:13 am
Location: On a mission close to DRS, Germany

Re: 43S News

Post by Walter »

ManuMa wrote:
Sat May 29, 2021 10:57 am
I've found a small typo: Pag 131 of the Owner's Manual: a "1" is missing before 2.3454321

Also in the next page, the menu name for the angular conversions is no longer on the "6" key, and its name has changed from L→ to the new icon.
Thanks, Manuel, for reporting. The first two observations are corrected now (will be visible with next upload). The "L" is a crutch since Luiz Viera's character set doesn't include an open angle symbol - it will stay. So 2 x 25 points for you.
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
User avatar
Walter
Posts: 3070
Joined: Tue May 02, 2017 11:13 am
Location: On a mission close to DRS, Germany

Re: 43S News

Post by Walter »

PierreMengisen wrote:
Sat May 29, 2021 12:31 pm
As for the OWNER'S MANUAL I think it's a bit too early to make definitive corrections. In the meantime I have listed the layout references that are currently incorrect. They are the references on pages 83, 131, 132, 142 (2*), 146, 150, 270, 276 and 281. Control made on the WP 43S U v0.20 version.
This is a known problem: either the graphic layout is ahead or the software when you change the keyboard. So, after each keyboard change, you need some time to reach equilibrium ... ummh ... equality again. The OM is of 2021-05-20, i.e. really old. Ongoing revision is looking at (hopefully) all the layout references and exchanging them. Thanks in advance for a little patience.
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
User avatar
PierreMengisen
Posts: 305
Joined: Wed Nov 29, 2017 1:38 pm
Location: Neuchâtel CH

Re: 43S News

Post by PierreMengisen »

Hei,
I am on page 142 of the OM. But I can't figure out how I can find the decimal equivalent of 222D hexadecimal.
Under INTS I can't validate the entry 222D :? :oops:
Pierre
[TI59 with PC100C; TI-84 Plus CE-T; HP41CV with HP IL loop & 2*82161A DCD & 82162 TP; HP15C; HP28S; DM41; DM41L; DM42; DM41X]
User avatar
Jaymos
Posts: 1635
Joined: Sun Nov 04, 2018 7:03 pm
Location: Cape Town

Re: 43S News

Post by Jaymos »

PierreMengisen wrote:
Sat May 29, 2021 3:15 pm
Hei,
I am on page 142 of the OM. But I can't figure out how I can find the decimal equivalent of 222D hexadecimal.
Under INTS I can't validate the entry 222D :? :oops:
If 222Dhex exists in the X register, type either

Code: Select all

# D
or

Code: Select all

# 10
.

If you type from default, type

Code: Select all

222D # H
then

Code: Select all

# D
Jaco Mostert
Elec Eng, South Africa
https://47calc.com C47 (s/n 03818 & 06199), WP43 (0015). In box: HP42S, HP32Sii, WP34S&C, HP28C, HP35s, EL-506P, EL-W506, PB700; ex: FX702P, 11C, HP67 & HP85; iOS: 42s Byron, Free42+, WP31S/34S, HCalc.
User avatar
PierreMengisen
Posts: 305
Joined: Wed Nov 29, 2017 1:38 pm
Location: Neuchâtel CH

Re: 43S News

Post by PierreMengisen »

Jaymos wrote:
Sat May 29, 2021 3:23 pm
If you type from default, type 222D # H
Yes but I don't know how I can write 222D in the register x :mrgreen:
I don't want to start with 8749 because that's what I'm looking for!
Last edited by PierreMengisen on Sat May 29, 2021 5:23 pm, edited 1 time in total.
Pierre
[TI59 with PC100C; TI-84 Plus CE-T; HP41CV with HP IL loop & 2*82161A DCD & 82162 TP; HP15C; HP28S; DM41; DM41L; DM42; DM41X]
User avatar
Walter
Posts: 3070
Joined: Tue May 02, 2017 11:13 am
Location: On a mission close to DRS, Germany

Re: 43S News

Post by Walter »

PierreMengisen wrote:
Sat May 29, 2021 5:11 pm
Jaymos wrote:
Sat May 29, 2021 3:23 pm
If you type from default, type 222D # H
Yes but I don't know how I can write 222D in the register x :mrgreen:
Type 2 2 2 INTS D # H, please. 8-)
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
User avatar
PierreMengisen
Posts: 305
Joined: Wed Nov 29, 2017 1:38 pm
Location: Neuchâtel CH

Re: 43S News

Post by PierreMengisen »

Walter wrote:
Sat May 29, 2021 5:13 pm

Type 2 2 2 INTS D # H, please. 8-)
sorry but the result is 222 in register Y and D hexadecimal in register X
Pierre
[TI59 with PC100C; TI-84 Plus CE-T; HP41CV with HP IL loop & 2*82161A DCD & 82162 TP; HP15C; HP28S; DM41; DM41L; DM42; DM41X]
User avatar
Over_score
Posts: 160
Joined: Fri May 05, 2017 9:37 pm
Location: France

Re: 43S News

Post by Over_score »

Try INTS 2 2 2 D # H then # 1 0 or # D (the D on the ln key)
DM42 SN00284 & SN03835 running C47, HP34C, HP41CV, HP42S, HP35s, WP34S, HP Prime
Post Reply