WP43 News
Re: 43S News
I would buy this whenever it becomes available. Thanks for all the effort that is being put into it.
DM42 - SN: 00054
DM41X - SN:00032
HP 10C,11C,12C,15C,16C,27S,34C,38C,41C/CV/CX,45,48S/SX,67,71B,75C,97S,
and alot more...
DM41X - SN:00032
HP 10C,11C,12C,15C,16C,27S,34C,38C,41C/CV/CX,45,48S/SX,67,71B,75C,97S,
and alot more...
- Stefan Karlsson
- Posts: 26
- Joined: Thu Apr 04, 2019 10:26 pm
Re: 43S News
I'd also buy it immediately. I would prefer "÷" over "/" on the keys, though (but I'm not complaining).
Re: 43S News
Some Greek or more Greek?
Edit: Look here for the draft layout published a year ago: viewtopic.php?f=2&t=1816&start=120 or here for a more recent layout shown with the simulator: https://sourceforge.net/projects/wp43s/
- There are some Greek letters looking like the corresponding Latin letters: A, B, E, I, K, M, N, O, T, Y, Z.
- There are others without a direct Latin equivalent: η, θ, χ, ψ.
- And there are some looking significantly different: Γ, Δ, λ, ξ, π, ρ, Σ, φ, ω.
This is the way we dealt with Greek letters on the WP34S, assuming sufficient knowledge and lacking keyboard space. Is there any need for more Greek prints on the keyboard of the 43S? If true, for which letter(s)?Prefix [g] leads to homophonic Greek letters.
Edit: Look here for the draft layout published a year ago: viewtopic.php?f=2&t=1816&start=120 or here for a more recent layout shown with the simulator: https://sourceforge.net/projects/wp43s/
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
Re: Some Greek or more Greek
Thanks for your feedback so far. If I understand you all correctly, we'll leave it as is. The polling station will close tomorrow at 23:00 UTC.
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
-
- Posts: 2
- Joined: Tue Apr 30, 2019 7:39 pm
Re: 43S News
Hello everyone,
I joined the wp43s development team and ported the simulator to MacOS as my first contribution.
The code is: https://gitlab.com/Over_score/wp43s, to compile under MacOS the following tools and libs must be installed:
1. Xcode from apple App Store
2. GCC and GTK with MacPort or using any other tool.
regards
john
I joined the wp43s development team and ported the simulator to MacOS as my first contribution.
The code is: https://gitlab.com/Over_score/wp43s, to compile under MacOS the following tools and libs must be installed:
1. Xcode from apple App Store
2. GCC and GTK with MacPort or using any other tool.
regards
john
Re: 43S News
Hi JohnBoydon
I installed the tools you mentioned, downloaded the code you linked, and compiled the wp43s executable that you mentioned. When wp43s is run from a Quartz terminal, the emulator opens, the buttons react to presses, but no response is registered on the screen. If I did not know better, I would say the battery has gone flat . I tried to click the 'ON' button, also to no avail. Nothing blows life into the emulator screen.
If you recognise the reason for this behaviour, I could really use a tip at this point.
I am unfamiliar with the tools, but I managed to set up the dev system on my MBP with Mojave, with MacPorts and Homebrew. I installed Quartz and ditched X11.
I also selfupdated MacPorts & Homebrew, removed the tools and re-installed and updated GCC9 & Gtk+3.
After the update process detailed above, I rebuilt wp43s by
and except for three identical gcc warnings (below), no other issues were reported during the compile and the newly compiled executable performed the same way as it did prior to me updating the whole dev system.
Symptoms are: unresponsive emulator.
Messages in the terminal:
Any ideas?
Best
Jaco
ps. Immediately spotted a few WP34s / WP43s typos. Edited and corrected.
I installed the tools you mentioned, downloaded the code you linked, and compiled the wp43s executable that you mentioned. When wp43s is run from a Quartz terminal, the emulator opens, the buttons react to presses, but no response is registered on the screen. If I did not know better, I would say the battery has gone flat . I tried to click the 'ON' button, also to no avail. Nothing blows life into the emulator screen.
If you recognise the reason for this behaviour, I could really use a tip at this point.
I am unfamiliar with the tools, but I managed to set up the dev system on my MBP with Mojave, with MacPorts and Homebrew. I installed Quartz and ditched X11.
I also selfupdated MacPorts & Homebrew, removed the tools and re-installed and updated GCC9 & Gtk+3.
After the update process detailed above, I rebuilt wp43s by
Code: Select all
$ make rebuild
Code: Select all
ld: warning: option -s is obsolete and being ignored
Symptoms are: unresponsive emulator.
Messages in the terminal:
Code: Select all
bash-3.2$ ./wp43s
objc[91858]: Class GNotificationCenterDelegate is implemented in both /usr/local/opt/glib/lib/libgio-2.0.0.dylib (0x106ef1578) and /opt/local/lib/libgio-2.0.0.dylib (0x106886498). One of the two will be used. Which one is undefined.
(process:91858): GLib-GObject-WARNING **: 23:32:04.528: gsignal.c:2523: signal 'destroy' is invalid for instance '0x7f7f8f00a290' of type '(null)'
(process:91858): GLib-GObject-WARNING **: 23:32:04.528: gsignal.c:2523: signal 'key_press_event' is invalid for instance '0x7f7f8f00a290' of type '(null)'
(process:91858): GLib-GObject-WARNING **: 23:32:04.528: gsignal.c:2523: signal 'configure-event' is invalid for instance '0x7f7f8f00a290' of type '(null)'
(process:91858): GLib-GObject-WARNING **: 23:32:04.534: gsignal.c:2523: signal 'draw' is invalid for instance '0x7f7f8f0210f0' of type '(null)'
(process:91858): GLib-GObject-WARNING **: 23:32:04.535: gsignal.c:2523: signal 'clicked' is invalid for instance '0x7f7f8f028180' of type '(null)'
.... many of the "gsignal.c:2523" issues listed, mostly with the text ..."signal 'clicked'" ...
First free byte in RAM: 1032
Last free byte in RAM: 32767
Free RAM: 31736
Cannot restore calc's memory from file backup.bin! Performing RESET
Any ideas?
Best
Jaco
ps. Immediately spotted a few WP34s / WP43s typos. Edited and corrected.
Jaco Mostert
Elec Eng, South Africa
https://47calc.com C47 (s/n 03818 & 06199), WP43 (0015). In box: HP42S, HP32Sii, WP34S&C, HP28C, HP35s, EL-506P, EL-W506, PB700; ex: FX702P, 11C, HP67 & HP85; iOS: 42s Byron, Free42+, WP31S/34S, HCalc.
Elec Eng, South Africa
https://47calc.com C47 (s/n 03818 & 06199), WP43 (0015). In box: HP42S, HP32Sii, WP34S&C, HP28C, HP35s, EL-506P, EL-W506, PB700; ex: FX702P, 11C, HP67 & HP85; iOS: 42s Byron, Free42+, WP31S/34S, HCalc.
Re: 43S News
@Jaco: Your question goes to our SW department.
@All: Meanwhile, some secondary labels traveled a bit, vanished and popped up: Functionality-wise, grouping should be improved this way. Waiting for CODATA 2019...
EDIT 2019-05-20: Well, they call it CODATA 2018 although it became effective today. Anyway it's in our menu now.
@All: Meanwhile, some secondary labels traveled a bit, vanished and popped up: Functionality-wise, grouping should be improved this way. Waiting for CODATA 2019...
EDIT 2019-05-20: Well, they call it CODATA 2018 although it became effective today. Anyway it's in our menu now.
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
-
- Posts: 2
- Joined: Tue Apr 30, 2019 7:39 pm
Re: 43S News
Hello Jaymos,Jaymos wrote: ↑Thu May 16, 2019 12:30 amHi JohnBoydon
I installed the tools you mentioned, downloaded the code you linked, and compiled the wp43s executable that you mentioned. When wp43s is run from a Quartz terminal, the emulator opens, the buttons react to presses, but no response is registered on the screen. If I did not know better, I would say the battery has gone flat . I tried to click the 'ON' button, also to no avail. Nothing blows life into the emulator screen.
If you recognise the reason for this behaviour, I could really use a tip at this point.
...snip...
to compile the project I used the tools installed using MacPorts. You need: gcc8, gtk3, freetype, gmake. Try again and let me know.
The only issue I have found is related to the screenshots that are different from the image on the screen.
Here you have the libraries linked in the executable:
Code: Select all
> otool -L wp43s
wp43s:
/opt/local/lib/libgtk-3.0.dylib (compatibility version 2201.0.0, current version 2201.30.0)
/opt/local/lib/libgdk-3.0.dylib (compatibility version 2201.0.0, current version 2201.30.0)
/opt/local/lib/libpangocairo-1.0.0.dylib (compatibility version 4201.0.0, current version 4201.4.0)
/opt/local/lib/libpango-1.0.0.dylib (compatibility version 4201.0.0, current version 4201.4.0)
/opt/local/lib/libatk-1.0.0.dylib (compatibility version 22811.0.0, current version 22811.1.0)
/opt/local/lib/libcairo-gobject.2.dylib (compatibility version 11603.0.0, current version 11603.0.0)
/opt/local/lib/libcairo.2.dylib (compatibility version 11603.0.0, current version 11603.0.0)
/opt/local/lib/libgdk_pixbuf-2.0.0.dylib (compatibility version 3613.0.0, current version 3613.0.0)
/opt/local/lib/libgio-2.0.0.dylib (compatibility version 5801.0.0, current version 5801.3.0)
/opt/local/lib/libgobject-2.0.0.dylib (compatibility version 5801.0.0, current version 5801.3.0)
/opt/local/lib/libglib-2.0.0.dylib (compatibility version 5801.0.0, current version 5801.3.0)
/opt/local/lib/libintl.8.dylib (compatibility version 10.0.0, current version 10.5.0)
/System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 1570.15.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 1252.250.1)
/opt/local/lib/libgcc/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0)
John.
+ Thu May 23 08:51:00 CEST 2019: Results of otool added.
Re: 43S News
Hi JohnBoydon
Thank you for the advice.
I uninstalled Homebrew and all its tools, uninstalled the incorrect MacPorts ports, installed the listed ones and ran the makefile again for successful executable creation.
The emulator now runs on my Mac.
Regards
Jaco
Thank you for the advice.
I uninstalled Homebrew and all its tools, uninstalled the incorrect MacPorts ports, installed the listed ones and ran the makefile again for successful executable creation.
The emulator now runs on my Mac.
Regards
Jaco
Jaco Mostert
Elec Eng, South Africa
https://47calc.com C47 (s/n 03818 & 06199), WP43 (0015). In box: HP42S, HP32Sii, WP34S&C, HP28C, HP35s, EL-506P, EL-W506, PB700; ex: FX702P, 11C, HP67 & HP85; iOS: 42s Byron, Free42+, WP31S/34S, HCalc.
Elec Eng, South Africa
https://47calc.com C47 (s/n 03818 & 06199), WP43 (0015). In box: HP42S, HP32Sii, WP34S&C, HP28C, HP35s, EL-506P, EL-W506, PB700; ex: FX702P, 11C, HP67 & HP85; iOS: 42s Byron, Free42+, WP31S/34S, HCalc.