The 41 needs keyboard overlays!
I see the bezel has three small slits on either side just like the 42, but contrary to the 42, the 41 needs overlays!
Geoff
Overlays!
-
- Posts: 328
- Joined: Wed May 24, 2017 10:44 pm
- Location: Vancouver Canada
- Contact:
Re: Overlays!
Hear, hear!Geoff Quickfall wrote: ↑Tue Feb 04, 2020 7:13 amThe 41 needs keyboard overlays!
I see the bezel has three small slits on either side just like the 42, but contrary to the 42, the 41 needs overlays!
Geoff
What is the metric tensor in imperial units?
Re: Overlays!
Just you wait, Henry Higgins, just you wait...!Geoff Quickfall wrote: ↑Tue Feb 04, 2020 7:13 amI see the bezel has three small slits on either side just like the 42, but contrary to the 42, the 41 needs overlays!
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
-
- Posts: 795
- Joined: Wed May 03, 2017 7:46 pm
- Location: Malone, NY USA
Re: Overlays!
Yes! Would the old 41 overlays fit?Geoff Quickfall wrote: ↑Tue Feb 04, 2020 7:13 amThe 41 needs keyboard overlays!
I see the bezel has three small slits on either side just like the 42, but contrary to the 42, the 41 needs overlays!
Geoff
An overlay is much better than a layover!
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Re: Overlays!
Obviously they won't.toml_12953 wrote: ↑Tue Feb 04, 2020 2:47 pmYes! Would the old 41 overlays fit?Geoff Quickfall wrote: ↑Tue Feb 04, 2020 7:13 amThe 41 needs keyboard overlays!
I see the bezel has three small slits on either side just like the 42, but contrary to the 42, the 41 needs overlays!
Geoff
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
-
- Posts: 795
- Joined: Wed May 03, 2017 7:46 pm
- Location: Malone, NY USA
Re: Overlays!
Since I've never seen an original 41 other than in photographs, it's not obvious to me!Walter wrote: ↑Tue Feb 04, 2020 2:58 pmObviously they won't.toml_12953 wrote: ↑Tue Feb 04, 2020 2:47 pmYes! Would the old 41 overlays fit?Geoff Quickfall wrote: ↑Tue Feb 04, 2020 7:13 amThe 41 needs keyboard overlays!
I see the bezel has three small slits on either side just like the 42, but contrary to the 42, the 41 needs overlays!
Geoff
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Re: Overlays!
toml_12953 wrote: ↑Tue Feb 04, 2020 3:01 pmSince I've never seen an original 41 other than in photographs, it's not obvious to me!
[DM1x/DM1xL/DM41/DM41L/DM41X/DM42]
Re: Overlays!
Even that should have been sufficient imho. YMMVtoml_12953 wrote: ↑Tue Feb 04, 2020 3:01 pmSince I've never seen an original 41 other than in photographs, it's not obvious to me!
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
-
- Posts: 795
- Joined: Wed May 03, 2017 7:46 pm
- Location: Malone, NY USA
Re: Overlays!
Of course you'd have to cut an extra column of keys out but I can't tell if the other key spacing is the same or not. I guess it must not be.
I never looked at those old photos thinking of a comparison to the 41x before. Now that I go back and look at them, I do see that they aren't compatible.
Hey, at least I've never lost a patient! Dead or alive I've always known right where they were.
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
-
- Posts: 328
- Joined: Wed May 24, 2017 10:44 pm
- Location: Vancouver Canada
- Contact:
Re: Overlays!
Hello Walter et al!
No they will not fit. Yes there are slits / slots?
And yes the DM41 needs overlays (layovers are great though!).
Let alone for all the modules that are resident or may be resident.
Latest version of my CL overlay:
The Zenrom key invokes the Zenrom module therefore I need to create these:
No they will not fit. Yes there are slits / slots?
And yes the DM41 needs overlays (layovers are great though!).
Let alone for all the modules that are resident or may be resident.
Latest version of my CL overlay:
The Zenrom key invokes the Zenrom module therefore I need to create these: