Hi,
currently my DM42 is flashed with the latest firmware as compiled by Swiss Micros (see signature).
I think I had encountered a bug ... or a door to synthetic programming the DM42 ?...
To clean the custom menu I created a short program with commands for all entries of the custom menu
like this:
ASSIGN "" TO 1
...
ASSIGN "" TO 18
I executed the program and it works fine.
For later use I saved the program to the SSD <cough> of my DM42
Later I loaded the program, tried to execute and it failed hard.
I browsed the program and all ASSIGN statements were converted to
XROM 0x000
...
XROM 0x018
Interestingly the numbers were transfered from decimal to hexadecimal characterwise without any numerical conversions.
"XROM" is neither known to my DM42 nor is it a "hidden" command, which needs to be entered character by character.
Conclusion:
ASSIGN "" TO <n> cannot be saved to flash. After deletion you need to enter the commands manually.
What did I found here?
Cheers!
mcc
Huston (Thomas), we have a problem
Huston (Thomas), we have a problem
DM 42 - SN: 00373, Firmware release v.:3.22. / DMCP 3.24. as compiled by SwissMicros
Re: Huston (Thomas), we have a problem
Confirmed, and Free42 (iOS v3.0.17) behaves the same way.
Thankfully, you didn't know about the CLKEYS command or you would never have found this
Cheers, Werner
Thankfully, you didn't know about the CLKEYS command or you would never have found this
Cheers, Werner
41CV†,42S,48GX,49G,DM42,DM41X,17BII,15CE, DM15L
Re: Huston (Thomas), we have a problem
Something funny happens when you try ASSIGN MEM.
Re: Huston (Thomas), we have a problem
....CLKEYS??? Surely? That's a command for dummys! Real women, real men use ASSIGN "" !
...Same goes for the many options to clear specific aspects of data...that's for noobs!
Real women, real men use the reset button at the back side of the DM42! Chuck Norris
would pull and reinsert the coin cell, though...
Cheers!
mcc
PS: Your serial number does not differ that much from mine, Werner!
DM 42 - SN: 00373, Firmware release v.:3.22. / DMCP 3.24. as compiled by SwissMicros
Re: Huston (Thomas), we have a problem
MEM is for instant execution....I think, that is the reason...
Cheers!
mcc
DM 42 - SN: 00373, Firmware release v.:3.22. / DMCP 3.24. as compiled by SwissMicros
Re: Huston (Thomas), we have a problem
Hi,
I mailed Thomas (24.2.2023) with a link to this thread.
Cheers!
mcc
I mailed Thomas (24.2.2023) with a link to this thread.
Cheers!
mcc
DM 42 - SN: 00373, Firmware release v.:3.22. / DMCP 3.24. as compiled by SwissMicros
Re: Huston (Thomas), we have a problem
Hi,
Thomas has sent me an email. He wrote, he will fix the bug next week.
Have a nice weekend!
Cheers
mcc
Thomas has sent me an email. He wrote, he will fix the bug next week.
Have a nice weekend!
Cheers
mcc
DM 42 - SN: 00373, Firmware release v.:3.22. / DMCP 3.24. as compiled by SwissMicros