Page 4 of 10

Re: DM42 Firmware V3.1 available

Posted: Sun Dec 24, 2017 1:32 pm
by Michael
Thomas_ER wrote:
Sun Dec 24, 2017 1:08 pm
Maybe https://www.swissmicros.com/dm42/fat/DM42.zip could be updated.
done

Re: DM42 Firmware V3.1 available

Posted: Sun Dec 24, 2017 2:45 pm
by Walter
Michael wrote:
Sun Dec 24, 2017 1:32 pm
Thomas_ER wrote:
Sun Dec 24, 2017 1:08 pm
Maybe https://www.swissmicros.com/dm42/fat/DM42.zip could be updated.
done
Merci!

And some minor space for improvement still:
  • "Eg." shall read "E.g."
  • REGS. and REGS, are highlighted where only REGS should be.
  • "ie." shall read "i.e."
  • "The Alpha register..." should read "The alpha register..." unless in titles.
  • "The Angle specifiers..." shall read "The angle specifiers...".
  • DEG, is highlighted where only DEG should be. Same applies for FIX, and SF, and maybe more.
  • At several locations periods are lacking at the end of sentences.
  • Remember the English list sequences "A, B, C, and D" where Germans list "A, B, C und D".
  • Some closing parentheses appear very close to an highlighted area; it may look better inserting a narrow blank heading the ")" for visual separation.
  • "AΣ mode" should presumably read "ALLΣ mode".
  • Items in the function list exceeding 1 line look as in the version before (no proper line feed still).
  • "MEAN Mean (average)" should be replaced by "MEAN Arithmetic mean (average)" for sake of clarity.
  • "MENU Programmable MENU" shall read "MENU Programmable menu"
  • ... (maybe more)

Re: DM42 Firmware V3.1 available

Posted: Sun Dec 24, 2017 3:08 pm
by keithdalby
Walter wrote:
Sun Dec 24, 2017 2:45 pm
[*]Remember the English list sequences "A, B, C, and D" where Germans list "A, B, C und D".
Ah, the Oxford comma, a potentially contentious point.

Re: DM42 Firmware V3.1 available

Posted: Sun Dec 24, 2017 3:43 pm
by Michael
Walter wrote:
Sun Dec 24, 2017 2:45 pm
And some minor space for improvement still:
  • ... (maybe more)
OK, went through most of it, except:
  • REGS. and REGS, are highlighted where only REGS should be.
  • DEG, is highlighted where only DEG should be. Same applies for FIX, and SF, and maybe more.
  • At several locations periods are lacking at the end of sentences.
  • Items in the function list exceeding 1 line look as in the version before (no proper line feed still).
Points 1 and 2 might be a parser issue
Point 3 not done yet
Point 4 parser improvement required

Re: DM42 Firmware V3.1 available

Posted: Mon Dec 25, 2017 12:08 am
by grsbanks
keithdalby wrote:
Sun Dec 24, 2017 3:08 pm
Walter wrote:
Sun Dec 24, 2017 2:45 pm
[*]Remember the English list sequences "A, B, C, and D" where Germans list "A, B, C und D".
Ah, the Oxford comma, a potentially contentious point.
Nothing contentious about it at all. It's just wrong :)

Re: DM42 Firmware V3.1 available

Posted: Mon Dec 25, 2017 3:44 am
by toml_12953
grsbanks wrote:
Mon Dec 25, 2017 12:08 am
keithdalby wrote:
Sun Dec 24, 2017 3:08 pm
Walter wrote:
Sun Dec 24, 2017 2:45 pm
[*]Remember the English list sequences "A, B, C, and D" where Germans list "A, B, C und D".
Ah, the Oxford comma, a potentially contentious point.
Nothing contentious about it at all. It's just wrong :)
The Oxford (or Harvard) comma is totally acceptable in North America (Canada, USA, Mexico) only. No other continent accepts its use. It can sometimes eliminate ambiguity.

"I would like to thank my parents, John and Mary" This could mean the writer wants to thank 4 people - his two parents and a person named John and a person named Mary. Or it could mean the writer's parents are named John and Mary so he is only thanking two people.

"I would like to thank my parents, John, and Mary"

In this case, the writer is definitely thanking 4 people. He is thanking his parents and he is thanking John and he is thanking Mary.
He cannot be thanking just two people. There is no ambiguity.

Re: DM42 Firmware V3.1 available

Posted: Mon Dec 25, 2017 4:21 am
by Bill (Smithville NJ)
This discussion about the use of commas reminded me of the story about the comma that cost a company a million dollars (Canadian).

Following is link to the story:

http://www.nytimes.com/2006/10/25/busin ... comma.html

Bill
Smithville, NJ

Re: DM42 Firmware V3.1 available

Posted: Mon Dec 25, 2017 4:36 am
by Walter
toml_12953 wrote:
Mon Dec 25, 2017 3:44 am
grsbanks wrote:
Mon Dec 25, 2017 12:08 am
keithdalby wrote:
Sun Dec 24, 2017 3:08 pm
Ah, the Oxford comma, a potentially contentious point.
Nothing contentious about it at all. It's just wrong :)
The Oxford (or Harvard) comma is totally acceptable in North America (Canada, USA, Mexico) only.
Yankee imperialism? ;)
No other continent accepts its use.
Continent? OK for Australia - but else?? Almost each and every continent is home of more languages than just one.

Re: DM42 Firmware V3.1 available

Posted: Mon Dec 25, 2017 5:18 am
by Thomas Okken
toml_12953 wrote:
Mon Dec 25, 2017 3:44 am
Englisch über alles! (Außer für jede andere Sprache.)
*shudder*

Please re-read your German grammar 101, then retake the test. :o

Also, Oxford comma all the way. If there's a noticeably long pause, write a comma, and call it Oxford or whatever you will. :mrgreen:

Re: DM42 Firmware V3.1 available

Posted: Mon Dec 25, 2017 8:49 am
by keithdalby
I was taught not to use the Oxford comma at primary school. I was taught to rewrite sentences to avoid ambiguity. Some of my friends, however, were taught to use it. Same country, same school system, different instructions. It seems what we learn and hold to be true depends on what our teachers were taught.

Turtles all the way down.

I hope you all have an enjoyable 25th December. Or 25 December. Or December 25th. Or December 25. Or 25/12/2017. Or 25/12/17. Or 25.12.2017. Or 12.25.2017. or 12-25-2017. Or 20171225. Or Christmas Day. Or Xmas Day. Or Chrimbo. Or Navidad. Or Noel. Or ........