- 100 ENTER 10 % produces 1.0000
- 45 ENTER 10 % also produces 1.0000
- 10 ENTER 3 % produces 0.4771
- 50 ENTER 100 % produces 2.0000
[DM15 M1B V25] % produces incorrect results
[DM15 M1B V25] % produces incorrect results
The % operator behaves strangely on my DM-15. Examples:
Re: [DM15 M1B V25] % produces incorrect results
Nope.
Both my units produce correct results.
Have you tried re-flashing the firmware?
Both my units produce correct results.
Have you tried re-flashing the firmware?
There are only 10 kinds of people in the world: those who understand binary and those who do not.
Re: [DM15 M1B V25] % produces incorrect results
Just an observation: it appears that your results are actually the LOG of the second argument (the value in X). Do you also have problems with y^x? Perhaps your keys aren't registering properly.
-
- Posts: 795
- Joined: Wed May 03, 2017 7:46 pm
- Location: Malone, NY USA
Re: [DM15 M1B V25] % produces incorrect results
If he had flashed the DM41L firmware onto the 15L, the LOG key would be where the y^x and % key is on the stock 15L although that's probably not the issue since if he pressed the blue key first, he'd get an alpha D.
Tom L
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Some people call me inept but I'm as ept as anybody!
DM10L SN: 059/100
DM41X SN: 00023 (Beta)
DM41X SN: 00506 (Shipping)
DM42 SN: 00025 (Beta)
DM42 SN: 00221 (Shipping)
WP43 SN: 00025 (Prototype)
Re: [DM15 M1B V25] % produces incorrect results
Aha! I performed the key self-test (with ÷-ON) and sure enough, I get “Error 9” when pressing the y^x button. The problem persists even through reflashing the firmware, which suggests it is indeed a hardware problem. Is it time to request a warranty replacement?