Hi!
hitting "ts" should allow me to set the time on my DM12L (the info screen shows RTC, so I assume it has a clock). I've tried to enter date and time but while I get no error, whatever I enter, the time and date are never set.
Is there any description how to do that via console?
Kind regards,
Taki
DL12L - setting time via console
DL12L - setting time via console
- DM15L S/N#00047
Re: DL12L - setting time via console
If you just enter ? as a command, you get a help screen:
Note the prompt: "Type '<command> ?' for params.
So try: ts ?
So there you have it, although the < and > signs are misleading because you don't actually type them.
To set the clock to today's date and the time now (as I'm writing this and in UTC+0100 time zone:
Code: Select all
Firmware DM15_M1B_V26
? Help
p Key press
s Dump memory
l Load memory
ct Console timeout
t Get time
ts Set time
td Update time
d Toggle display output to console
b Read battery voltage
Type '<command> ?' for params
Uptime 23s
VOYAGER >>
So try: ts ?
Code: Select all
Set time
<YYYYMMDD> <HHMMSS>
VOYAGER >>
To set the clock to today's date and the time now (as I'm writing this and in UTC+0100 time zone:
Code: Select all
ts 20180327 184810
There are only 10 kinds of people in the world: those who understand binary and those who do not.
Re: DL12L - setting time via console
Thanks for the fast reply. It works. After entering "ts ?" I thought I had to enter "ts" and then (after hitting enter) the date.
Time and date are set now
Time and date are set now
- DM15L S/N#00047