Hi,
Enter this into your DM42
998001
1/x
And then
<YELLOW> SHOW
...and (if wanted) watch this afterwards:
https://www.youtube.com/watch?v=daro6K6mym8
Have fun!
Cheers!
Meino
Somehow unrelated but related...somehow
Somehow unrelated but related...somehow
Last edited by mcc on Fri Apr 06, 2018 8:08 pm, edited 1 time in total.
DM 42 - SN: 00373, Firmware release v.:3.22. / DMCP 3.24. as compiled by SwissMicros
Re: Somehow unrelated but related...somehow
You should probably advise to set FIX 09 / Eng 09 / Sci 09 first. For example the result in Fix 02 is not too interesting.
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
Re: Somehow unrelated but related...somehow
Hi,
ok
I edited my previous post accordingly...
Cheers
Meino
ok
I edited my previous post accordingly...
Cheers
Meino
DM 42 - SN: 00373, Firmware release v.:3.22. / DMCP 3.24. as compiled by SwissMicros
Re: Somehow unrelated but related...somehow
That's the fun with 9's
If you do 1/99^2 you get all numbers from 00 to 99, exept 98 after the decimal point.
1/999^2 (1/998001), you get your result
1/9999^2 (1/99980001) and its 0000-9999 except 9998 after decimal point.
And so on..
I use Maxima with bfloat command (bigfloat or large floating point) and 1024 decimal "precision" to get those numbers and I've seen that this amazing phenomena occurs with all 1/9...9^2 calculations.
http://maxima.sourceforge.net/
If you do 1/99^2 you get all numbers from 00 to 99, exept 98 after the decimal point.
1/999^2 (1/998001), you get your result
1/9999^2 (1/99980001) and its 0000-9999 except 9998 after decimal point.
And so on..
I use Maxima with bfloat command (bigfloat or large floating point) and 1024 decimal "precision" to get those numbers and I've seen that this amazing phenomena occurs with all 1/9...9^2 calculations.
http://maxima.sourceforge.net/
Esben
DM42 SN: 00245, WP43 Pilot SN:00002, DM32 SN: 00045 (Listed in obtained order).
DM42 SN: 00245, WP43 Pilot SN:00002, DM32 SN: 00045 (Listed in obtained order).