[DM10L] The wait is over!

Forum for discussion of the DM10, DM11, DM12, DM15, DM16 and DM41 units
marie
Posts: 23
Joined: Sun Aug 27, 2017 2:05 pm

Re: [DM10L] The wait is over!

Post by marie » Thu Jan 09, 2020 12:36 am

KimWood wrote:
Wed Jan 08, 2020 8:53 pm
Michael, thank you for delivering on your commitment to make this calculator available. You are clearly a man of your word. I have ordered my first DM10L. A second unit will surely follow.

Well done,

Kim

____________________________________________________________
Calculators? Too many to mention. What if my wife should read this!
+++1

Fully agree with that !

ctrclckws
Posts: 16
Joined: Sun Feb 17, 2019 3:30 pm

Re: [DM10L] The wait is over!

Post by ctrclckws » Thu Jan 09, 2020 12:39 am

marie wrote:
Thu Jan 09, 2020 12:36 am
KimWood wrote:
Wed Jan 08, 2020 8:53 pm
Michael, thank you for delivering on your commitment to make this calculator available. You are clearly a man of your word. I have ordered my first DM10L. A second unit will surely follow.

Well done,

Kim


____________________________________________________________
Calculators? Too many to mention. What if my wife should read this!
+++1

Fully agree with that !
Make +2 for me

pauli
Posts: 61
Joined: Tue May 02, 2017 8:11 am
Location: Australia

Re: [DM10L] The wait is over!

Post by pauli » Thu Jan 09, 2020 7:53 am

grsbanks wrote:
Wed Jan 08, 2020 5:29 pm
The HP-10C/DM10L cannot accommodate more than 79 program steps.
What might be possible would be 79 program steps and all 10 registers. This would require updating the ROM image in the firmware.


Pauli

marie
Posts: 23
Joined: Sun Aug 27, 2017 2:05 pm

Re: [DM10L] The wait is over!

Post by marie » Thu Jan 09, 2020 10:59 am

Why building a DM-10 with more capabilities as the DM-11 and DM-15 are available ?

grsbanks
Posts: 862
Joined: Tue Apr 25, 2017 9:23 am
Location: Preston, Lancs, UK
Contact:

Re: [DM10L] The wait is over!

Post by grsbanks » Thu Jan 09, 2020 11:42 am

pauli wrote:
Thu Jan 09, 2020 7:53 am
What might be possible would be 79 program steps and all 10 registers. This would require updating the ROM image in the firmware.
That's a very good point.

It's not going to happen just yet because David has his hands full with work on the DM41X. He's also backporting some of the improvements to the Nut emulation layer that were made for the 41X to the DM1x/41 machines. But it's something worth discussing and maybe putting on the to-do list.
Not SwissMicros staff, just an enthusiast.

User avatar
akaTB
Posts: 313
Joined: Tue May 02, 2017 11:56 am

Re: [DM10L] The wait is over!

Post by akaTB » Thu Jan 09, 2020 12:50 pm

grsbanks wrote:
Thu Jan 09, 2020 11:42 am
(...)David has his hands full with work on the DM41X.
That's good news, indeed! :D
Greetings,
    Massimo

-+×÷ left is right and right is wrong :twisted: Casted in gold

User avatar
tuxfish
Posts: 11
Joined: Thu Sep 14, 2017 10:17 am

Re: [DM10L] The wait is over!

Post by tuxfish » Sun Jan 12, 2020 12:55 pm

Marvelous - thanks for making this dream come true !
Can't wait to hold it in my hands & play around with it :D
Cheers !
FX-602P, HP-12c, 17B, 32E, 41C, 48G, 50g, DM 11L, 15L, 42 …

User avatar
tuxfish
Posts: 11
Joined: Thu Sep 14, 2017 10:17 am

Re: [DM10L] The wait is over! - Unpacking :)

Post by tuxfish » Thu Jan 16, 2020 7:02 pm

Hi,

my DM10L arrived in its distinctive sturdy box today.
The serial no. is the desired one, too.
Hurray ! :D

Four small pictures from the "unpacking" can be found here:
https://www.magentacloud.de/share/aj2vlyv-e6

The DM10L has the same comfortable grip like the DM15L/11L and is fun to work with.
The lettering "Collector's Edition" is a brilliant addition.
The four main screws, holding the backplane to the front, are at least one third longer
in comparison to those of earlier DM11L models, which is a nice improvement.
The mainboard is rev8 and powered by the same resourceful LPC1115 (ARM Cortex-M0)
as in other DM1x, micro:bit, Calliope mini or other devices ;) .

It is a well done work, IMO worth the wait & I can only recommend it.
FX-602P, HP-12c, 17B, 32E, 41C, 48G, 50g, DM 11L, 15L, 42 …

ctrclckws
Posts: 16
Joined: Sun Feb 17, 2019 3:30 pm

Re: [DM10L] The wait is over!

Post by ctrclckws » Fri Jan 17, 2020 2:04 am

The DM10L is now available on SwissMicros main order page.

Post Reply