Hi to all,
I have deleted the print directory on my DM42.
No problem, I thought, just re-create a 'PRINTS' new one at the root and it should be ok.
But no, nothing prints out : PRSTK, PRP and so on... yes, PON is activated and the printer icon activates when I print.
Any help or suggestions appreciated.
Thanks
Printing issue
Printing issue
Last edited by mezoganet on Tue Jan 29, 2019 7:38 pm, edited 1 time in total.
HP33E, HP34C, HP41C, HP16C, HP28S, HP42S, HP48S, HP12C, HP35S, DM42, DM41L, DM15L, DM41X (SN#15) and HP3000 @ work during 18 yrs as IT Mgr
-
- Posts: 328
- Joined: Wed May 24, 2017 10:44 pm
- Location: Vancouver Canada
- Contact:
Re: Printing issue
The only thing I can think of is to save programs and reload the latest full update via usb.
Don’t save state as this will only save the corrupt print menu.
Geoff
Don’t save state as this will only save the corrupt print menu.
Geoff
Re: Printing issue
Geoff,Geoff Quickfall wrote: ↑Tue Jan 29, 2019 7:09 pmThe only thing I can think of is to save programs and reload the latest full update via usb.
Geoff
Thanks for your answer...
I can't find on SwissMIicros site a "full update" to load.
Patrick
EDIT...
Eveyrhing is ok, I just missed the « Print to file » configuration, nothing else. Restarting from an empty state after last update might be the origin.
Thanks Geoff
HP33E, HP34C, HP41C, HP16C, HP28S, HP42S, HP48S, HP12C, HP35S, DM42, DM41L, DM15L, DM41X (SN#15) and HP3000 @ work during 18 yrs as IT Mgr
-
- Posts: 328
- Joined: Wed May 24, 2017 10:44 pm
- Location: Vancouver Canada
- Contact:
Re: Printing issue
Geoff,Geoff Quickfall wrote: ↑Wed Jan 30, 2019 2:24 amGood!
If you end up needing the latest firmware:
https://www.swissmicros.com/dm42/firmware/
Cheers
This is the firmware update that went well from the first release day.
It cannot help in anything else than update the firmware. It will not erase nor create the original directory structure nor modify your current settings/preferences.
So, something to know, if you erase some original directory (in my case 'PRINTS') just re-create it manually, but don't forget to setup 'PON' and 'Print to file' options.
Thanks again for your time.
Have a nice day !
HP33E, HP34C, HP41C, HP16C, HP28S, HP42S, HP48S, HP12C, HP35S, DM42, DM41L, DM15L, DM41X (SN#15) and HP3000 @ work during 18 yrs as IT Mgr
Re: Printing issue
Maybe the content of https://www.swissmicros.com/dm42/fat/ should be updated.
Greetings,
Massimo
ajcaton
-+×÷ left is right and right is wrong Casted in gold
Massimo
ajcaton
-+×÷ left is right and right is wrong Casted in gold
Re: Printing issue
There is a new HELP file in there, dated 190129, which you can manually copy to the DM42 /HELP folder, but I agree it would be nice to have a new version of FAT_YYMMDD.zip posted when something is updated, so it's easier to both notice that something is new and keep the content sets organized.akaTB wrote: ↑Wed Jan 30, 2019 7:25 amMaybe the content of https://www.swissmicros.com/dm42/fat/ should be updated.
--bob p
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
DM42: β00071 & 00282, DM41X: β00071 & 00656, DM10L: 071/100
Re: Printing issue
@rprosperi
I did the last update as soon as issued...
The problem was the one above, in my edit.
Thanks anyway
HP33E, HP34C, HP41C, HP16C, HP28S, HP42S, HP48S, HP12C, HP35S, DM42, DM41L, DM15L, DM41X (SN#15) and HP3000 @ work during 18 yrs as IT Mgr