Updating from 3.3 to 3.10
Re: Updating from 3.3 to 3.10
Your case looks like one for the inner circle (most probably for David, I guess).
WP43 SN00000, 34S, and 31S for obvious reasons; HP-35, 45, ..., 35S, 15CE, DM16L S/N# 00093, DM42β SN:00041
Re: Updating from 3.3 to 3.10
You may need to format the FAT disk from DMCP's "7. Enter System Menu" => "4. Format FAT Disk". Then exit back to the DMCP menu and activate the USB disk from there (with the calculator connected via USB of course). Then, if you can see the DM42 FAT disk from your computer, you should be able to reload the QSPI flash via the FAT method (and also restore the original files on the FAT disk).DA74254 wrote: ↑Sat Oct 06, 2018 7:05 pmIf your QSPI is faulty/corrupt, you have "nothing to lose" in trying either 4. or 5. as described in the manual.
http://www.swissmicros.com/dm42/doc/dm4 ... _load_menu
If you successfully manage to format the QSPI (Maybe you lose some space if there are corrupt blocks in it, but the 5. option should mask them from the calc system), you can restore the files in the (remaining) QSPI space from the zip-file found here:
http://www.swissmicros.com/dm42/fat/
Re: Updating from 3.3 to 3.10
Here again is the latest status:
from the DMCP menu, I've formatted and checked the FAT disk.
I then got to 'activate USB disk' from the DMCP menu.
The PC chirps indicating that the driver is working (and Control Panel shows it installed and working properly).
BUT the DM42 does NOT show in file explorer, thus I cannot get to the FAT disk from the PC.
Also, from the DM tool, the only way it can 'see' the ST flash is when I put the DM42 in bootloader mode. I can then flash files from here, but in andy case, the FAT disk does not appear in file manager.
(hoping GRS will chime in soon!!!)
from the DMCP menu, I've formatted and checked the FAT disk.
I then got to 'activate USB disk' from the DMCP menu.
The PC chirps indicating that the driver is working (and Control Panel shows it installed and working properly).
BUT the DM42 does NOT show in file explorer, thus I cannot get to the FAT disk from the PC.
Also, from the DM tool, the only way it can 'see' the ST flash is when I put the DM42 in bootloader mode. I can then flash files from here, but in andy case, the FAT disk does not appear in file manager.
(hoping GRS will chime in soon!!!)
TomC
DM42:00068/03961, DM41X:
DM42:00068/03961, DM41X:
Re: Updating from 3.3 to 3.10
Have you tried another PC, or even maybe a phone (Android/Iphone) via OTG?
Just to bring to evidence that it *is* the calc and not the device(s) you connect to.
And - do you connect to USB3 or USB2 port? I have actually experienced that USB3 will "pling" but not show up as the drive (QSPI) is to "small", only 6MB.
Just to bring to evidence that it *is* the calc and not the device(s) you connect to.
And - do you connect to USB3 or USB2 port? I have actually experienced that USB3 will "pling" but not show up as the drive (QSPI) is to "small", only 6MB.
Esben
DM42 SN: 00245, WP43 Pilot SN:00002, DM32 SN: 00045 (Listed in obtained order).
DM42 SN: 00245, WP43 Pilot SN:00002, DM32 SN: 00045 (Listed in obtained order).
Re: Updating from 3.3 to 3.10
This is the same PC, etc I've been using since the prototype era.
I can try another PC setup, although given that when the DM42 3.10 is installed and appears to run yet gives garbled results in the stack tells me that there is something corrupt at a very low level.
TomC
I can try another PC setup, although given that when the DM42 3.10 is installed and appears to run yet gives garbled results in the stack tells me that there is something corrupt at a very low level.
TomC
TomC
DM42:00068/03961, DM41X:
DM42:00068/03961, DM41X:
Re: Updating from 3.3 to 3.10
Hmm, OK.
But there is a tiny slim maybe skinny chance that your PC *might* have correupted the QSPI via a faulty USB port.
I admit it is fairly thin, that chance, given all the tries you have done.
Garbeled results in the stack does not sound very good, though.
As a last resort before invoking Michael and maybe an exchange unit; Have you opened the calc to check that all internal cabling are OK?
(If you accidently maybe have dropped it and something inside has become askew).
But there is a tiny slim maybe skinny chance that your PC *might* have correupted the QSPI via a faulty USB port.
I admit it is fairly thin, that chance, given all the tries you have done.
Garbeled results in the stack does not sound very good, though.
As a last resort before invoking Michael and maybe an exchange unit; Have you opened the calc to check that all internal cabling are OK?
(If you accidently maybe have dropped it and something inside has become askew).
Esben
DM42 SN: 00245, WP43 Pilot SN:00002, DM32 SN: 00045 (Listed in obtained order).
DM42 SN: 00245, WP43 Pilot SN:00002, DM32 SN: 00045 (Listed in obtained order).
Re: Updating from 3.3 to 3.10
Fascinating News everyone!!!:
1. Moved to a different PC(Win10).--> DM42 now shows up in File Manager!!
( I still would like to know how to fix this in my 'usual' PC as using this one is inconvenient)
2. Flashed 3.10 and SEEMED to work!!! But garbled characters persisted!!!
3. Reflashed QSPI. Unit now seems to work.!!!???
(just now need to review OFFIMG settings, .raw file usage).
The testing will continue!
Thank you all for your persistence!
TomC
DM42:00068
1. Moved to a different PC(Win10).--> DM42 now shows up in File Manager!!
( I still would like to know how to fix this in my 'usual' PC as using this one is inconvenient)
2. Flashed 3.10 and SEEMED to work!!! But garbled characters persisted!!!
3. Reflashed QSPI. Unit now seems to work.!!!???
(just now need to review OFFIMG settings, .raw file usage).
The testing will continue!
Thank you all for your persistence!
TomC
DM42:00068
TomC
DM42:00068/03961, DM41X:
DM42:00068/03961, DM41X:
Re: Updating from 3.3 to 3.10
If your calculator says "QSPI not loaded" and the FAT disk does not show up when you plug the DM42 into a USB port and activate the FAT drive, then it looks very much like you have a faulty QSPI chip.
If I were you I'd get in touch with michael@swissmicros.com and ask what to do next.
If I were you I'd get in touch with michael@swissmicros.com and ask what to do next.
There are only 10 kinds of people in the world: those who understand binary and those who do not.
Re: Updating from 3.3 to 3.10
Hello GRS:
Thank you for the reply.
Since I reflashed the QSPI, screen shows:
QSPI SIZE 1370864 CRC: 000cfed6
QSPI READY
PGM IFC: 3.9 DMCP IFC:3.9
DMCP IFC COMPATIBLE
All seems fine, I've loaded and run programs.
I still have to try on the machine that the DM42 did not show up in explorer.
Regards,
TomC
Thank you for the reply.
Since I reflashed the QSPI, screen shows:
QSPI SIZE 1370864 CRC: 000cfed6
QSPI READY
PGM IFC: 3.9 DMCP IFC:3.9
DMCP IFC COMPATIBLE
All seems fine, I've loaded and run programs.
I still have to try on the machine that the DM42 did not show up in explorer.
Regards,
TomC
TomC
DM42:00068/03961, DM41X:
DM42:00068/03961, DM41X:
Re: Updating from 3.3 to 3.10
Those numbers all look correct.
On your usual PC, do any devices with exclamation marks appear in Windows Device Manager when you connect the DM42 and "Activate USB Disk"? If so, then delete those devices in Device Manager, 'eject' the USB device if possible (but it shouldn't matter since it never got mounted as a file system), and disconnect the USB. The next time you reconnect and "Activate USB Disk", then it will install as a new device and will hopefully have sorted things out.
On your usual PC, do any devices with exclamation marks appear in Windows Device Manager when you connect the DM42 and "Activate USB Disk"? If so, then delete those devices in Device Manager, 'eject' the USB device if possible (but it shouldn't matter since it never got mounted as a file system), and disconnect the USB. The next time you reconnect and "Activate USB Disk", then it will install as a new device and will hopefully have sorted things out.