UPDATE: DMCP-3.12 / DM42-3.12

This is where announcements of firmware updates for the DM42 calculator will be made
Thomas_ER
Posts: 79
Joined: Mon Jul 24, 2017 1:19 pm
Location: Germany

Re: UPDATE: DMCP-3.12 / DM42-3.12

Post by Thomas_ER » Fri Jan 25, 2019 7:15 pm

akaTB wrote:
Thu Jan 24, 2019 9:26 am
.. contact David ..
Maybe better Michael, imho he is the boss :-)
[ HP48/49/50/42S/WP34/HP Prime/ DM42 (#00185+00318) ]

User avatar
akaTB
Posts: 300
Joined: Tue May 02, 2017 11:56 am

Re: UPDATE: DMCP-3.12 / DM42-3.12

Post by akaTB » Fri Jan 25, 2019 8:48 pm

Thomas_ER wrote:
Fri Jan 25, 2019 7:15 pm
akaTB wrote:
Thu Jan 24, 2019 9:26 am
.. contact David ..
Maybe better Michael, imho he is the boss :-)
If I write David, I know what I write.
For technical problems David is the man. :!:
Greetings,
    Massimo

-+×÷ left is right and right is wrong :twisted: Casted in gold

Thomas_ER
Posts: 79
Joined: Mon Jul 24, 2017 1:19 pm
Location: Germany

Re: UPDATE: DMCP-3.12 / DM42-3.12

Post by Thomas_ER » Fri Feb 22, 2019 8:11 am

H2X wrote:
Thu Jan 24, 2019 8:17 am
H2X wrote:
Wed Jan 23, 2019 11:20 pm
grsbanks wrote:
Tue Jan 22, 2019 1:04 pm
Power-off mode

Offers several levels of power off with different components switched on/off. Useful for diagnosing excessive power consumption.
Which components need to be switched on when the calculator is switched off?
I am actually having a bit of bother which seems related to power. Several months ago I updated my (beta) DM42, and it died after a few days. Replacing the battery helped for another few days, then it died again.

I then put the calculator away, forgot about it for a while, and then updated it a couple of weeks ago (to 3.11), but it still has the same problem. I suspected the batch of batteries I was using and bought a new one from a different brand. I installed it a couple of days ago, and guess what - today my calculator is dead.

Does this sound familiar to anyone?
Hello H2X,
Did you get any response from Swissmicros (if you asked one or both) ?
Many thanks in advance,
Thomas
[ HP48/49/50/42S/WP34/HP Prime/ DM42 (#00185+00318) ]

User avatar
H2X
Posts: 420
Joined: Tue Apr 25, 2017 6:00 am
Location: Norway

Re: UPDATE: DMCP-3.12 / DM42-3.12

Post by H2X » Fri Feb 22, 2019 3:11 pm

Thomas_ER wrote:
Fri Feb 22, 2019 8:11 am
Hello H2X,
Did you get any response from Swissmicros (if you asked one or both) ?
Many thanks in advance,
Thomas
Yes! :-)
DM42 SN:00040 | Without deviation from the norm, progress is not possible - Frank Zappa

Thomas_ER
Posts: 79
Joined: Mon Jul 24, 2017 1:19 pm
Location: Germany

Re: UPDATE: DMCP-3.12 / DM42-3.12

Post by Thomas_ER » Wed Mar 06, 2019 10:20 am

H2X wrote:
Fri Feb 22, 2019 3:11 pm
Thomas_ER wrote:
Fri Feb 22, 2019 8:11 am
Hello H2X,
Did you get any response from Swissmicros (if you asked one or both) ?
Many thanks in advance,
Thomas
Yes! :-)
hopefully a completely satisfactory answer. Anything relevant for other owners?
[ HP48/49/50/42S/WP34/HP Prime/ DM42 (#00185+00318) ]

User avatar
H2X
Posts: 420
Joined: Tue Apr 25, 2017 6:00 am
Location: Norway

Re: UPDATE: DMCP-3.12 / DM42-3.12

Post by H2X » Sat Mar 09, 2019 11:29 am

Thomas_ER wrote:
Wed Mar 06, 2019 10:20 am
H2X wrote:
Fri Feb 22, 2019 3:11 pm
Thomas_ER wrote:
Fri Feb 22, 2019 8:11 am
Hello H2X,
Did you get any response from Swissmicros (if you asked one or both) ?
Many thanks in advance,
Thomas
Yes! :-)
hopefully a completely satisfactory answer. Anything relevant for other owners?
Two capacitors need to be replaced. I am sending them my calculator.
DM42 SN:00040 | Without deviation from the norm, progress is not possible - Frank Zappa

Thomas_ER
Posts: 79
Joined: Mon Jul 24, 2017 1:19 pm
Location: Germany

Re: UPDATE: DMCP-3.12 / DM42-3.12

Post by Thomas_ER » Mon Mar 11, 2019 9:33 am

Thank you very much!
[ HP48/49/50/42S/WP34/HP Prime/ DM42 (#00185+00318) ]

Thomas_ER
Posts: 79
Joined: Mon Jul 24, 2017 1:19 pm
Location: Germany

Re: UPDATE DMCP 3 12 / DM42 3 12

Post by Thomas_ER » Fri Oct 25, 2019 2:00 pm

ScorpMom wrote:
Thu Oct 24, 2019 11:36 pm
Hi,
even if it is still a beta is already usable and stable.
Very good program.
...but Im not able to find how to call the phpdocumentor.
any help?

thanks
are you searching for the "DM42 Program Encoder & Decoder"?
https://www.swissmicros.com/dm42/decoder/
[ HP48/49/50/42S/WP34/HP Prime/ DM42 (#00185+00318) ]

Post Reply