[DM41] Should alarms turn DM41 on ?

This is the place to discuss the usage of DM1x/DM41 machines and to share any tips & tricks you may have stumbled across.

If discussing a specific model, please ensure that you prefix topic subjects with the model number this way:

[DM41] How to change the number of program steps available
pinkman
Posts: 8
Joined: Sat Feb 03, 2018 11:25 am

Re: [DM41] Should alarms turn DM41 on ?

Post by pinkman » Mon Feb 26, 2018 9:00 pm

Thanks for your useful videos. Unfortunately mine does not have this behavior, and I believe the problem is on SwissMicros side.

Here is my version of the same video: https://youtu.be/011XhhiK-vI

Dani R.
Posts: 33
Joined: Fri May 05, 2017 8:23 pm

Re: [DM41] Should alarms turn DM41 on ?

Post by Dani R. » Mon Feb 26, 2018 9:25 pm

My DM-41 works without problems with the firmware version V25 and XYZALM, but also with the previous versions. I always use the HP-41 Ultimate Alarm Clock (UAC) from Geir Isene. I work with CLK24 and DMY on 12MHz.
DM42 SN:00032

Boub65
Posts: 65
Joined: Tue Sep 12, 2017 2:34 pm
Location: Rabat, Morocco

Re: [DM41] Should alarms turn DM41 on ?

Post by Boub65 » Mon Feb 26, 2018 11:48 pm

pinkman wrote:
Mon Feb 26, 2018 9:00 pm
Thanks for your useful videos. Unfortunately mine does not have this behavior, and I believe the problem is on SwissMicros side.

Here is my version of the same video: https://youtu.be/011XhhiK-vI
I confirm that your DM41L has a strange behavior!
2xDM15L, DM41L
DM42 SN#00855

pinkman
Posts: 8
Joined: Sat Feb 03, 2018 11:25 am

Re: [DM41] Should alarms turn DM41 on ?

Post by pinkman » Tue Feb 27, 2018 9:49 am

Boub65 wrote:
Mon Feb 26, 2018 11:48 pm

I confirm that your DM41L has a strange behavior!
I don't think it's only mine, apparently recent DM41 and DM41L models have an issue with the RTC, as I received a defective DM41 replaced by a defective DM41L. Or I am particularly unlucky...

The symptoms are :
- DM41 : alarms not working properly, clock not working (either [A]+[ON] or [f][ON]), stopwatch not working (XEQ SW then R/S and ENTER, etc.)
- DM41L : alarms not working properly, clock working, stopwatch working

Post Reply